Remote Control Unit - Sanyo KHS1872 Instruction Manual

Transmitter
ION button
QUIET button
FAN SPEED selector button
FLAP button
ON TIME
Advance button
setting
Return button
buttons
CANCEL button
SENSOR button
ADDRESS switch
NOTE
Transmitter
Sensor
Display
ION button
ON/OFF operation button
1 HR. TIMER button
(1-HOUR OFF TIMER)
8

Remote Control Unit

Display
Temperature display
selector button
The illustration above pictures the remote control unit after the cover has been
opened.
When you press the buttons on the remote control unit, the
the display to transmit the setting changes to the receiver in the air conditioner.
A temperature sensor inside the remote control unit senses the room
temperature.
Information on the operating conditions is displayed while the remote control unit
is switched on. If the unit is turned off, FLAP setting and FAN SPEED setting are
not displayed.
: This button is for turning the negative ions generated during operation on
and off.
This button is for turning the air conditioner on and off.
: When you press this button, regardless of whether the unit is operating or
stopping, the unit operates for one hour and then shuts down.
Sensor
ON/OFF operation button
1 HR. TIMER button
Temperature setting buttons (TEMP.)
MODE selector button
NIGHT SETBACK button
HIGH POWER button
Advance button
Return button
CLOCK button
Time display selector button
ACL button
(Cover closed)
OFF TIME
setting
buttons
mark appears in
OI-801-8-EG