Figure 2: Mounting the Adapter Plate in a PAB2 Enclosure (Black & Red)
Hardware included in the kit:
1. #10-32 steel-zinc plated locknuts, QTY = 4
2. #4-40 x 7/8" long standoffs to be used to mount the audio transformer kit, QTY = 2.
3. Ground lug to be used for landing the shielding wires, QTY = 1.
1. It is preferable to mount the Booster assembly on the adapter plate first using the hardware provided
with the Booster Assembly.
2. Using the four locknuts provided, mount the adapter plate assembly inside the enclosure as shown in
Figures 1 and 2.
BAAP ADAPTER PLATE
UP TO 33AH