.
Performance
4
4. Performance
4.1 Operating Conditions
For operating conditions, consult your supplier.
4.2 Control Power Requirements
The control power table is based on nominal operating conditions. For other operating conditions consult
your supplier.
Control power must be continuously maintained for the ESS to remain on-line. Loss of control power will
result in the automatic isolation of the ESS from the UPS.
Table 4-1: Control Power Range of Operation
No. Item
1 Nominal Voltage
2 Nominal Current
3 Inrush Current
4 Control Power Circuits
5 Control Power Source
4.3 Hardware
The use of proper hardware is critical to the assembly of the ESS. Should the supplied hardware be lost or
damaged replacement hardware must meet the following description.
Table 4-2: Hardware Description
Item
Screw M5 x 10 mm
Screw M8 x 16 mm
Screw M10 x 25 mm
Screw M12 x 16 mm
Screw M12 x 25 mm
Screw M12 x 30 mm
88
Specification
480VAC
0.1A
15A
2
Uninterrupted
Pitch
0.8 mm
1.25 mm
1.5 mm
1.25 mm
1.25 mm
1.25 mm
Remarks
3 phase & gnd
Operating
Sub-cycle
Redundant
During battery discharge
Hardness
70 (Grade 7)
70 (Grade 7)
70 (Grade 7)
70 (Grade 7)
70 (Grade 7)
70 (Grade 7)
ET003222373
English 4/2018. Rev 0.0