TP-Link TL-WR840N Quick Installation Manual

Quick Installation Guide
Multi-mode Router
Meet all your needs.
If your internet connection is through an Ethernet
cable directly from the wall, instead of through a
modem, connect the Ethernet cable to the router's
WAN port, and skip steps 1, 2, and 3.
Configure the router
1. Connect your computer to the router (Wired or Wireless)
Wired
Turn off the Wi-Fi on your computer and connect it to the router
via an Ethernet cable.
Wireless
Connect your device to
the router's Wi-Fi using
the SSID (network name)
and Wireless Password
printed on the label at
the bottom of the router.
POWER
Power adapter
POWER
Connect the power adapter
to the router.
2. Launch a web browser, and enter http://tplinkwifi.net or
http://192.168.0.1 in the address bar. Use admin for both
username and password to log in.
Note: If the login window does not appear, please refer to FAQ > Q1.
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
Image may differ from your actual product.
WPS/
WAN 1 2 3 4 RESET
Router
WAN
http://tplinkwifi.net
admin
admin
Login
Turn off the modem, and remove
the backup battery if it has one.
Turn on the modem and then wait
about 2 minutes for it to restart.
Connect the modem to the router's
WAN port via an Ethernet cable.
3. Click Next to start the Quick Setup. Select Wireless Router and
follow the step-by-step instructions to set up the internet
connection.
Note: If you are not sure of the WAN Connection Type, please click Auto-Detect.
Modem