Remote Control Unit - Sanyo CH0951 Technical & Service Manual

Display
ON/OFF operation button
1 HR. TIMER button
FAN SPEED selector button
FLAP button
TIMER ON button
TIMER OFF button
SET button
CANCEL button
ADDRESS switch
NOTE
Transmitter
Display
NIGHT SETBACK button
TEMP. setting buttons
ON/OFF operation
button
TIMER ON button
TIMER OFF button
8

Remote Control Unit

SET TEMP.
ON
1HR.
TIMER
OFF
FAN SPEED MODE
FLAP
ON OFF
SET CANCEL
BATTERIES
A B
The illustration above pictures the remote control unit after the cover has
been lowered and removed.
When you press the buttons on the remote control unit, the
appears in the display and the setting changes are transmitted to the
receiver in the air conditioner.
Information on the operating status is displayed while the remote control
unit is switched on. If the unit is turned off, only the mode that was set
previously is still displayed.
For details, see "Night Setback Mode". When you press this button in the
DRY, COOL or HEAT mode, the
remote control unit automatically adjusts the set temperature to save
energy.
Press the button to increase the temperature setting.
Press the button to reduce the temperature setting.
This button is for turning the air conditioner on and off.
: The air conditioner starts at the set time.
ON
: The air conditioner stops at the set time.
OFF
Transmitter
1
HR.
ON
OFF
H
TEMP.
TEMP. setting buttons
MODE selector button
NIGHT
SETBACK
NIGHT SETBACK button
ACL
ACL button
Battery compartment
(Pull off the cover to expose the
batteries.)
mark appears in the display, and the
(Cover closed)
mark
OI-202-10EG