Unit Display And Operation Selector - Sanyo C0951 Technical & Service Manual

Split system air conditioner
Hide thumbs Also See for C0951:
Table of Contents

Advertisement

INDOOR UNIT
KS1852
OPERATION lamp
TIMER lamp
OPERATION
TIMER
IMPORTANT
Avoid using radio equipment such as mobile phones
near (within 1 m of) the indoor unit. Some radio
equipment may cause the unit to malfunction.
If the trouble occurs, disconnect power and restart the
air conditioner after a few minutes.
Remote control receiver
Operation selector
ON position
OFF position
TEST position
CAUTION
OPERATION lamp
TIMER lamp
6

Unit Display and Operation Selector

ON
OFF
TEST
Operation selector
Remote control
receiver
This section picks up infrared signals from the remote control unit
(transmitter).
This position is for operating the air conditioner with the wireless
remote control unit.
Set the selector normally in this position.
Switch the selector to the OFF position if you are not going to use
the air conditioner for a few days or longer.
The OFF position does not disconnect the power. Use the main
power switch to turn off power completely.
This position is used only when servicing the air conditioner.
Do not set at the TEST position for normal operation.
This lamp lights when the system is in the continuous DRY and
COOL mode.
This lamp lights when the system is being controlled by the timer.
INDOOR UNIT
KS0951
KS1251
OFF
TEST
Remote control receiver
OPERATION
TIMER
TIMER lamp
OPERATION lamp
Operation selector
ON
OI-330-06EG

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C1251C1852Cl0951Cl1251Cl1852Ks0951 ... Show all

Table of Contents