Electrical Shock Hazard
Plug into a grounded (earthed) outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Plug refrigerator into a earthed socket.
If doors need to be removed during installation, see the
"Remove and Replace Refrigerator Doors" and "Remove and
Replace Freezer Door Fronts" sections.
Doors seal completely.
Refrigerator is level. Adjust leveling feet so they are snug
against the floor.
Doors are even across the top. (Use door alignment feature if
Remove all shipping material.
Set temperature controls to the recommended setting.
Save instructions and other literature.
In order to receive a more complete assistance, please
register your product on www.whirlpool.eu/register.
Unpack the Refrigerator
Excessive Weight Hazard
Use two or more people to move and install
Failure to do so can result in back or other injury.
A minimum door opening of 838 mm (33") is required. If door
opening is 914 mm (36") or less, then removal of doors, drawer
and hinges is required.
Cart the refrigerator from the side for all door openings.
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator for
the refrigerator straight out when moving it. Do not wiggle or
damage could occur.
Remove the Packaging
Remove tape and glue residues from surfaces before
turning on the refrigerator. Rub a small amount of liquid dish
detergent over the adhesive with your fingers. Wipe with warm
water and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator.
Dispose of/recycle all packaging materials.
Clean Before Using
After you remove all of the packaging materials, clean inside of
your refrigerator before using it. See cleaning instructions in the
"Refrigerator Care" section.