Start SpeechAir management software from
SpeechExec
1
Install SpeechExec software as described in
Install
SpeechExec on your
computer.
2
Make sure that SpeechAir is turned on and connect
the device to your computer.
3
Click
or
on the toolbar in SpeechExec.
X The General Settings window opens.
4
In the General Settings window, click SpeechAir
configuration > Device configuration > Start
SpeechAir management software.
Configure SpeechAir with
SpeechAir management software
The management software allows you to configure
various settings for your SpeechAir and Philips Voice
Recorder App. The configuration can be immediately
transferred to your connected SpeechAir.
Note
• Before you start Philips SpeechAir management
software, connect SpeechAir to your computer.
The mangement software can only be used with a
connected device.
• Depending on your device’s preset configurations,
some settings might be locked. In this case, you can’t
configure any settings with SpeechAir management
software.
Device configuration screen
When you start the management software, you will see
a welcome screen. Once you connect SpeechAir to your
computer, you will see the device configuration screen.
The toolbar contains the following options:
• Click Load default to discard all your changes and
revert back to the factory settings.
• Click Open file to open a configuration previously
saved on your computer.
• Click Save file to save the current configuration to your
computer.
• Click Save file as to save the current configuration to
your computer with a different name.
• Click Send to SpeechAir to transfer the current
configuration to your SpeechAir.
• Click Load from SpeechAir to download the current
SpeechAir configuration to the management software.
Page 46