Advertisement
LIGHTING THE MAIN BURNERS
USING
ELECTRONIC
IGNITION
1. ()pen the lid.
2.
Ensure
all burner control
knobs
are in the "OFF' position.
3.
Turn on the LP gas by slowly
turning
the hand wheel
on the cylinder
valve.
4.
Turn one main burner
control
knob to "High".
5.
Depress
the electronic
ignition
button
and hold down.
You should
hear a clicking
sound, which
shows the
electronic
ignition
is working.
6.
If the burner
does not light within
5 seconds,
turn the burner
control
knob to °'OFF'. Wait 5 minutes
for the
gas to clear, and repeat the above procedure.
Use the Manual
directions
if it still will not light.
7.
When
lit, turn the control
knob to the desired
setting.
8. Your
grill is equipped
with continuous
ignition.
Simply
turn any other of the main burner
control
knobs
next to the lit burner
to "High"
to light, and then to the desired
heat setting.
They will ignite
automatically
once the initial
burner
is lit. Do not press the electronic
ignition
button again.
MANUALLY
LIGHTING
THE
MAIN
BURNERS
WITH
THE
MATCH
LIGHTING
STICK
1. ()pen the lid.
2.
Ensure
all burners
are in the °'Off'
position.
3.
Turn on the LP gas.
4.
Place
a match
in the Match
Lighting
Stick.
This is located
on
the left side of the grill cabinet
underneath
the side burner
shelf.
5.
Strike the match,
and insert into the lighting
hole close to the burner.
6.
Turn the left burner
control
knob to "High".
7.
If the burner
does not light within
5 seconds,
turn the burner
control
knob to "OFF'.
Wait 5 minutes
for gas to clear, and try again.
8. When
lit, turn the control
knob to the desired
setting.
9.
Then turn the burner
control
knob of the burner
next to it to "High"
and continue
to do so until all are lit.
LIGHTING
THE
SIDE
BURNER
WITH
ELECTRONIC
IGNITION
1. ()pen the side burner
cover
2.
Ensure
the side burner
control
knob is in the "OFF' position,
as well as any main burners
not in use.
3.
Turn on the LP gas if it is not already
on.
4.
Turn the side burner
control
knob to "High".
5.
Depress
the electronic
ignition
button
and hold.
You should
hear a clicking
sound, which
shows
the
electronic
ignition
is working.
6.
If the burner
does not light within
5 seconds,
turn the burner
control
knob to °'Off".
Wait 5 minutes
for the
gas to clear, and repeat the above procedure.
Use the Manual
directions
if it still will not light.
7.
When
lit, turn the side burner control
knob to its desired
setting.
LIGHTING
THE
SIDE
BURNER
WITH
THE
MATCH
LIGHTING
STICK
1. ()pen the side burner
cover.
2.
Ensure
the side burner
control
knob is in the °'OFF' position,
as well
as any main burner
not in use.
3.
Turn on the LP gas if it is not already
on.
4.
Strike the match,
and place near the top of the burner.
5.
Turn the side burner
control
knob to "High".
6.
If the burner
does not light within
5 seconds,
turn the burner
control
knob to °'OFF'. Wait 5 minutes
for the gas to clear,
and try again.
7,
When
lit, turn the side burner control
knob to its desired
setting.
21
Advertisement
