Antenna connections
If you are using an indoor or outdoor
antenna, followthe
instructions belowthat
correspond to your antenna
system, if you are using a Cable TV service, see page 11 for Cable TV connections.
Combination
VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead
wire)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
Antenna
Antenna
Jack
75 ohm
Coaxial
Cable
Jack
300-75 oh
Matching
Transformer
If your combination
VHF/UHF antenna has a 300
ohm twin-lead
wire, the use of the 300-75 ohm
matching transformer
may be necessary.
Combination
VHF/UHF Antenna (Separate
VHF and UHF 300 ohm twin=lead wires)
_
_'
Connect the UHF 300 ohm twin-lead wire to the
Combiner
(not supplied).
Connect the VHF 300
Antenna
Jack
ohm twin-lead wire to the 300-75 ohm Matching
T
Transformer.
Attach the Transformer
to the Com-
biner, then attach the Combiner to the Antenna
Jack.
Combiner
|
UHF 300 ohm _
I_
/
'
I_VHF3Oe°hm
300-75 ohm Matching Transformer
Separate
VHF/UHF
Antennas
(75 ohm
VHF cable and 300 ohm
UHF twin=lead
wires)
_
Connect the VHF 75 ohm cable and UHF 300 ohm
Antenna @
twin-lead
wire to the Combiner
(not supplied).
Jack
_
Attach the Combiner to the Antenna Jack.
/
UHF3OO°hm
_F|_
j
VHF 75 ohm
10