Page 1
Professional Upright 9100 Series Owners Guide Montante profesional guía de 9100 dueños de la serie Montant professionnel guide de 9100 propriétaires de série Part No. 79244 (10/08) index important Safeguards How to Assemble How to Use How to Maintain Warranty índice...
• Use only as described in this manual. Use only manufacturer’s recommended attachments. • Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center before using.
After the 30 minute period, plug the cleaner back in and push the on/off switch on (I). Of the cleaner still does not run, then take it to a Sanitaire/Eureka Authorized Serivce Center for repair.
Page 5
enGLiSH ASSeMBLY PAcKeT The assembly pack is with the owner’s guide. The packet contains one machine screw and nut to fasten the handle assembly to the cleaner ASSeMBLY caution: Fully assemble the cleaner before using. Open the dust bag cover. Slide the metal portion of the handle assembly down the channel until it fully seats on the lower retainer.
How to Use Recommended example of carpet Settings Position 1 Hard Floors Position 2 Low Pile Position 3 Medium Pile Position 4 High Pile carpet Bare Floors...
The upright vacuum cleaner is designed to be used on multiple types of carpeting. Do not attempt to use the upright cleaner with the brush roll operating on bare floors, as damage to the floor covering may result. HAndLe AdjUSTMenT 1.
Page 9
enGLiSH caution: Turn off the switch and unplug the electrical cord before maintenance. important: Improper installation of the brush roll or brush roll belt could cause carpet or cleaner damage. HOW TO RePLAce THe HePA FiLTeR ASSeMBLY Pull down on the filter assembly latch to release. Pivot the filter away from the machine and remove.
Page 11
à n’importe quel Centre service agréé Sanitaire. Vous trouverez le centre le plus proche dans les Pages Jaunes sous « Aspirateurs—service et réparation ». Soyez certain le Centre service est «...
Need help?
Do you have a question about the 9100 Series and is the answer not in the manual?
Questions and answers