Table of Contents
Advertisement
Quick Links
For location of nearest
Eureka Warranty Station
or service information call
1-800-800-8975.
*En Mexico llame al 5670-6169.
Commercial
Floor Machine
6000 Series
Owner's Guide
Important Safeguards ................. 2
General Information .................... 2
Grounding Instructions ............... 3
Operation/Accessories ............... 3
Remove From Carton ................. 4
Adjustments ................................ 5
Controls ...................................... 6
Guidelines For Operation ............ 6
Cord Storage .............................. 7
Clean Up And Storage ................ 7
Warranty ..................... Back Cover
Please Retain
We suggest you record the model, type and serial numbers
below. They are located on the silver rating plate on your
cleaner. For prompt and complete service information, always
refer to these numbers when inquiring about service.
Model & Type___________________________
Serial No. ______________________
It is also important to keep your receipt as proof of date of
purchase.
Index
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sanitaire 6000 Series
Summary of Contents for Sanitaire 6000 Series
-
Page 1: Table Of Contents
For location of nearest Eureka Warranty Station or service information call 1-800-800-8975. *En Mexico llame al 5670-6169. Commercial Floor Machine 6000 Series Owner’s Guide Index Important Safeguards ... 2 General Information ... 2 Grounding Instructions ... 3 Operation/Accessories ... 3 Remove From Carton ... -
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. To reduce the risk of fire, electric shock, or injury: • Your machine is equipped with a safety switch lock and power switch triggers designed for your safety. -
Page 3: Grounding Instructions
Grounding Instructions This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment- grounding conductor and grounding plug. -
Page 4: Remove From Carton
HOW TO REMOVE POLISHER FROM SHIPPING CRATE 1. Lift up on handle to release lock. 4. Lift upper handle and place end-to-end against lower handle, lining up the holes for the bolts. Slide handle sleeve downward until all holes are lined up. 7. -
Page 5: Brush & Drive Block Installation
BRUSH AND PAD DRIVER INSTALLATION CAUTION: Disconnect the power cord from the electrical outlet before installing a brush or pad driver. Fig. 4 To install a brush or pad driver, leave the handle in the upright position and tip the machine backwards so it rests on its wheels and upper handle section (Fig. -
Page 6: Controls
ADJUSTMENTS (Continued) HANDLE CAM LOCK ADJUSTMENT With the handle cam lock in the “up” position (unlocked), tighten the adjusting nuts until there is a slight drag when the handle is raised or lowered. The tube should be locked securely when the handle lock is pressed downward (Fig. -
Page 7: Cord Storage
CORD STORAGE When not in use, loosely wind the power cord around the cord storage hook on the handle shaft and both of the handle grips, as shown. CLEAN UP AND STORAGE After being used, your floor machine can be wiped clean with a soft, damp cloth and should be stored in a clean, dry place. -
Page 8: Warranty
THE MANUFACTURER will not, as a matter of its Limited Warranty policy, refund the customer’s purchase price. Be certain that the Warranty Station is “Eureka/Sanitaire Authorized.” For the location of the nearest Eureka/Sanitaire Authorized Station or for service information, see us at www.sanitairevac.com or telephone toll free: 1-800-800-8975.
Need help?
Do you have a question about the 6000 Series and is the answer not in the manual?
Questions and answers