Cleaning; Cleaning The Appliance - Silvercrest STD 2200 A1 Operating Instructions Manual

Cleaning

Cleaning the appliance

DANGER – RISK OF ELECTRICAL SHOCK!
► Remove the power plug from the mains socket before starting to clean the
appliance.
►
WARNING – RISK OF BURNS!
► Allow the appliance to cool sufficiently before cleaning it.
CAUTION – PROPERTY DAMAGE!
► Do not use abrasive or caustic cleaning agents. These can attack the
surface and damage the appliance beyond repair.
To achieve the best result for tea on each brewing process, the appliance should
be cleaned after every use. This prevents that:
▯ the combination of lime and tannins, caused by boiling water and brewing
tea, affects the functioning of the tea maker;
▯ the jug might absorb the flavour of particularly aromatic teas and affecting
other varieties of tea, if the tea maker is used regularly.
■ Clean all exterior surfaces and the power cable with a slightly dampened
cloth. Always dry the appliance properly before using it again. Use a mild
detergent on the cloth for stubborn dirt. Ensure that there is no detergent
residue on or in the appliance before using it again.
■ Clean the inside of the jug
clear water.
■ If there are any deposits in the jug
dampened cloth or a dish/bottle brush. Then rinse the jug
water again.
■ Clean the lid
hot dishwater and rinse them thoroughly under running water.
■ 28
│ GB
Never submerge the appliance under water or other liquids! There is
a risk of electric shock! The appliance may be irreparably damaged.
, the permanent filter
with dish soap, then rinse the jug
, wipe the interior surface with a
and the brewing chamber
with
with clean
with
STD 2200 A1