Non-Functionality; Cleaning; Cleaning The Motor Block - Silvercrest SFW 350 C1 Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4

Non-functionality

If the drive is blocked by accumulated food:
Press the button "0"
Press and hold the button "<"
direction. This enables you to transport the food which has become stuck a
short way backwards, and the motor to run freely again.
When the drive runs smoothly again, release the "<"
Press the button "I"
If you do not succeed in getting the drive free with this, clean the appliance
as described in the chapter "Cleaning".
Should the motor suddenly stop, it could be due to automatic
activation of the internal overload fuse. This is intended to
protect the motor.
Switch the appliance off and allow it cool down for approximately 30 minutes
before continuing to use it.
Should this not work, wait for a further 15 minutes.
If it still does not function at the end of this period, this indicates a technical
problem. In this case, contact the Customer Service Centre.
If the power cable is damaged or the accessories are
visibly damaged:
Immediately switch the appliance off by pressing the "0"
If this is not possible without risk to personal safety, disconnect the plug from
the mains power socket.
Arrange for the defective parts to be repaired by Customer Services before
re-using the appliance.

Cleaning

RISK OF ELECTRIC SHOCK
Disconnect the plug from the mains power socket before cleaning the appli-
ance. In this way accidents caused by the inadvertent switching on of the
appliance and electric shocks can be avoided.

Cleaning the motor block

Clean the exterior surfaces and the power cable with a slightly damp cloth.
Dry the appliance well before re-using it.
12 
GB
to stop the meat grinder.
. The appliance will now run in the reverse
to re-start the meat grinder.
button.
button!
SFW 350 C1

Advertisement

Table of Contents
loading

Table of Contents