Electrical Connection - Silvercrest SZA 28 B2 Operating Instructions Manual

Electrical connection

The power for the indoor aerial
adapter or via a receiver with a 5 V remote power supply.
5
CAUTION
► Before connecting the device, compare the specifi cations for the required
input voltage on the rating plate with the intended voltage source for
operation. This data must agree in order to avoid damaging the product.
► The power socket must be easily accessible so that the mains adapter
can be easily disconnected in an emergency.
► Check to ensure that the mains adapter cable
that it is not routed over hot surfaces and or sharp edges, otherwise it
could be damaged.
► Ensure that the mains adapter cable
Power adapter
♦ Connect the low voltage plug of the mains adapter
on the rear of the device.
♦ Plug the mains adapter
Receiver with 5 V remote power supply
♦ Ensure that your receiver has a 5 V remote power supply via the aerial
output and that this is switched on. Consult the operating manual of your
receiver for further information.
♦ Connect the aerial cable
nection on your receiver. The indoor aerial
via the aerial output of the receiver.
SZA 28 B2
can be delivered via supplied the mains
is not stretched tight or kinked.
5
into a properly installed power socket.
5
from the indoor aerial
2
is not damaged and
5
to the power socket
5
to the aerial con-
will now receive its power
GB
5
4
9