Husqvarna Z 242F Operator's Manual page 5

REGISTRO DE SERVICIO
Acción
Realizar el mantenimiento después de 25 horas
Realizar el mantenimiento después de 50 horas
Limpiar/reemplazar las bujías
Comprobar/apretar los pernos de los ejes de las ruedecillas
(cada 200 horas
Acción
Realizar el mantenimiento después de 25 horas
Realizar el mantenimiento después de 50 horas
Realizar el mantenimiento después de 100 horas
Revisar/ajustar el equipo de corte
Acción
Limpiar la toma de aire de refrigeración del motor (25 horas)
horas)
Cambiar el aceite del motor (50 horas)
Comprobar/ajustar la altura de corte
Comprobar/ajustar el freno de estacionamiento (50 horas)
Limpiar/cambiar las bujías (100 horas)
72
Fecha, Lectura De Medidor,
Sello, Firma
Fecha, Lectura De Medidor,
Sello, Firma
Fecha, Lectura De Medidor,
Sello, Firma
INTRODUCTION
Good Service
Husqvarna's products are sold throughout the
world and only in specialized retail stores with
complete service. This ensures that you as a
customer receive only the best support and
service. Before the product is delivered, the
machine has, for example, been inspected and
When you need spare parts or support in service
questions, warranty issues, etc., please consult
the following professional:
This manual belongs to the machine with the
manufacturing number:
Manufacturing Number
The machine's manufacturing number can be
compartment.
Stated on the plate, from the top are:
• The machine's type designation (I.D.).
• The manufacturer's type number (Model).
• The machine's serial number (Serial no.)
Please have the type designation and serial
number available when ordering spare parts.
Engine Transmission
The engine's manufacturing number is stamped
on one of the valve covers.
The plate states:
• The engine's model.
• The engine's type.
• Code
Please have these available when ordering spare
parts.
The wheel motors and hydrostatic pumps have a
5