Download Print this page
Radio Shack 26-446 User Manual
Radio Shack 26-446 User Manual

Radio Shack 26-446 User Manual

8 fire button digital/analog gamepad

Advertisement

Quick Links

8 Fire Button Digital/Analog
Gamepad
Your RadioShack 8 Fire Button Digital/Analog
Gamepad lets you take control of the latest
MS-DOS and Windows computer games!
The gamepad's advanced features include:
Analog/Digital Control — lets you switch be-
tween analog and digital control for different
types of games. Analog control provides better
response for driving and flight simulation
games, while digital control provides better
performance for action and fighting games.
Analog Throttle — lets you easily control
throttle functions in many driving and flight
simulation games.
Dual Triggers and 6 Control Buttons — give
you the flexibility you need to play games with
multiple controls. You can disable individual
pairs of control buttons, letting you use an ad-
ditional gamepad or joystick in some 2-player
games.
Analog Joystick — allows precise control in
an almost infinite number of directions.
Thumb-Control Pad — allows precise control
in eight directions.
Independent/Automatic Fire Selectors — let
you fire a continuous or single high-speed
blast from one button while manually control-
ling the others.
COMPATIBILITY
Hardware — Your gamepad works with IBM
and compatible PCs equipped with a joystick
port, using the industry-standard 15-pin D sub-
miniature connector. Joystick ports are also
available on game cards and enhanced sound
cards.
Important Notes:
• To take advantage of all of your game-
pad's features, you must have a game
card with a single dual port installed in
your computer. (A dual-port game card is
®
© 1999 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation.
designed to run two 2-button joysticks or
gamepads at the same time using a Y-
connector).
• Make sure you have only one game card
(such as a sound card or multi I/O card
with a built-in game port) enabled at once.
If you have multiple game cards enabled,
they might conflict with one another, caus-
ing your gamepad to operate erratically. If
you have a dedicated game card, you
must disable your sound card's or multi
I/O card's game port. Check your comput-
er's documentation or contact your com-
puter dealer for more information, if
necessary.
• You must have DirectX
stalled on your computer to properly test
the gamepad with the included driver. If
necessary, you can download DirectX at
www.microsoft.com/directx/default.asp .
Software — You can use your gamepad with
any PC-compatible software that supports a
gamepad.
Note: The function of each of the gamepad's
buttons depends on the game you are playing.
Consult your game's owner's manual for more
information.
INSTALLING THE SUPPLIED
DRIVER
If you are using Windows 95 or 98 and want to
set up all 8 of your gamepad's fire buttons for
one player, you must install the driver from the
supplied diskette.
1. Close all programs in use, then insert the
supplied diskette into your computer's
floppy disk drive.
2. Set the
A
,
B
,
C
switches to
NORMAL.
3. From the Start Menu, select Settings ,
then click on Control Panel .
4. Double click Add/Remove Programs .
5. Click Install , then follow the instructions
that appear.
26-446
Cat. No.
®
5.0 or above in-
,
D
,
R1/R2
, and
T1/T2

Advertisement

loading

Summary of Contents for Radio Shack 26-446

  • Page 1 Control Panel . 4. Double click Add/Remove Programs . 5. Click Install , then follow the instructions that appear. © 1999 Tandy Corporation. All Rights Reserved. 26-446 Cat. No. ® 5.0 or above in- R1/R2 , and...
  • Page 2 USING THE GAMEPAD Cautions: • Always turn off your computer before con- necting or disconnecting the gamepad from the game port. • When disconnecting the gamepad from the computer, hold and gently pull on the connector plug. Do not pull the cable. Your gamepad has two triggers ( six buttons ( has two turbo/auto firing control switches...
  • Page 3 For maximum comfort, keep your elbows close to your sides and rest your forearms on your lap if you play for a long time. Notes: • You cannot use the thumb-control pad when the gamepad is set to analog mode. You cannot use the joystick when the gamepad is set to digital mode.
  • Page 4 Follow these steps to calibrate the gamepad. 1. Turn off the computer. 2. Insert the gamepad’s connector into game port A on your computer, then turn on the computer. 3. Set the R1/R2 switches to NORMAL. 4. If you want to use the gamepad’s throttle, THROTTLE/T1/T2 THROTTLE 5.