Table of Contents
Advertisement
Presetting the Stations Automatically
GB
Your VCR contains a built-in tuner used to receive television
broadcasts.
INSTALL
PROG
OPTIONS
INSTALL
You must preset the stations received through the tuner. This can
be done:
CLOCK
BONUS
LANG
INSTALLATION
➛❿¤¤
œ ❷¤¤
OK
END:
MENU
You can store up to 80 stations.
(SV-655B/650B/450B/255B/250B)
1
INSTALL
AUTO SET UP
2
MANUAL SET UP
VCR OUTPUT CH :CH38
3
❿
œ ❷
END:
MENU
4
(SV-655X/650X/450X/250X)
5
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH36
❿
œ ❷
END:
MENU
6
YOUR DATA WILL BE LOST
PRESS
OK
TO CONTINUE
MENU
TO EXIT
AUTO SET UP
PLEASE WAIT
2%
I--------------------I
END:MENU
18
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
Plug & Auto Set up (see page 13)
Automatically
Manually (see page 19)
Press the MENU button on the remote control.
Result:
The programming menu is displayed.
or ➛, ❿ buttons to select the
Press the corresponding
,
œ
❷
option.
INSTALLATION
Press the OK button to select this option.
Result:
The
INSTALLATION
menu is displayed.
Press the corresponding
or
buttons, until the
œ
❷
AUTO SET
UP
option is selected.
Press the ❿ button to select this option.
Press OK to start the auto scanning.
Result:
The
PLEASE WAIT
indication flashes on the
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The VCR then searches for the second station and
so on.
When the automatic scanning procedure has
finished, the VCR switches automatically to
programme 1.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
If you wish to cancel the auto scanning before the end, press the
MENU button three times to exit the menu.
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 20).
Presetting the Stations Manually
Your VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
Plug & Auto Set up (see page 13)
Automatically (see page 18)
Manually
You can store up to 80 stations.
You do not need to preset the stations manually if you
have already set them automatically.
1
Press the MENU button on the remote control.
Result:
The programming menu is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding
œ
,
❷
INSTALLATION
option.
3
Press the OK button to select this option.
Result:
The
INSTALLATION
menu is displayed.
4
Press the corresponding
œ
or
❷
buttons, until the
MANUAL SET
UP
option is selected.
Press the ❿ button to select
5
MANUAL SET UP
option.
Result:
The
TV STATION TABLE
menu is displayed.
6
Press the
œ
or
❷
buttons to select a programme number as
required.
Press the ❿¤¤button to preset the station.
7
Result:
The
MANUAL TUNING
menu is displayed.
Press the ➛ or ❿ buttons to start scanning.
8
Result:
The frequency band is scanned and the first station
found is displayed.
If you know the number of the channel you want, press the
numeric buttons on the remote control for example, for channel
06, first press "0" and then press "6". (see age 44)
9
Press the
œ
or
❷
buttons until the
NAME
is selected.
To change the programme's name, press the ❿¤button.
10
Result:
The first letter of the name flashes.
11
To...
Then...
Select a character
Press the
œ
or
❷
button until the
in the name
required character is displayed
(letters, numbers or "-" character).
Press the ❿ or ➛ buttons
Move to the next or
previous character
respectively.
12
If you...
Then...
Wish to store the
Press the corresponding
œ
or
station displayed
until the
MFT
is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press OK to store the station .
Do not wish to
Press the corresponding
œ
or
store the station
until the
CH
is selected.
Press the ➛ or ❿ buttons to go on
displayed
scanning the frequency band and display
the next station
Go back to the beginning of Step
13
6
Repeat this procedure from Step
onwards, until all the required
stations have been stored.
14
On completion, press the MENU button three times to exit the menu.
INSTALL
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
INSTALLATION
➛❿¤¤
œ ❷¤¤
OK
END:
MENU
(SV-655B/650B/450B/255B/250B)
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
❿
œ ❷
END:
MENU
(SV-655X/650X/450X/250X)
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH36
❿
œ ❷
END:
MENU
** TV STATION TABLE **
PR
CH
NAME
1
002
CAEB
2
---
----
3
---
----
4
---
----
5
---
----
❿
œ ❷
SWAPPING:OK
DELETE:CLR/RST
MENU
❷¤
buttons,
** MANUAL TUNING **
PR
:
1
❷¤
buttons,
CH
: ---
MFT
:
-
NAME
: ----
➛❿
MEMORY:
OK
œ ❷
12
END:
MENU
19
GB
Hide quick links:
Advertisement
Table of Contents
