Summary of Contents for Adeunis RF FIELD TEST DEVICE sigfox Europe RC1
Page 1
FIELD TEST DEVICE sigfox Europe RC1 Guide utilisateur / User Guide Version V1.1.3 Adeunis 283 rue Louis Néel - Parc Technologique Pré Roux 38920 CROLLES - France www.adeunis.com...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 Table des matières / Contents / ... FRANÇAIS INFORMATIONS DISCLAIMER SUPPORT TECHNIQUE INTRODUCTION RECOMMANDATIONS ENVIRONNEMENTALES AVERTISSEMENTS RECOMMANDATIONS D’USAGE PRÉSENTATION DU PRODUIT 1.1. Description 1.2. Caractéristiques mécaniques 1.3.
Page 3
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 ENGLISH INFORMATIONS DISCLAIMER TECHNICAL SUPPORT INTRODUCTION ENVIRONMENTAL RECOMMENDATIONS WARNINGS RECOMMENDATIONS REGARDING USE DISPOSAL OF WASTE BY USERS IN PRIVATE HOUSEHOLDS WITHIN THE EUROPEAN UNION INTRODUCING THE DEVICE 1.1.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 INFORMATIONS Information document Titre FIELD TEST DEVICE Sous-titre sigfox Europe Type de document Mode d'emploi Version V1.1.3 Ce document s’applique aux produits suivants : Référence Version Firmware FIELD TEST DEVICE - sigfox Europe A partir de : ARF8121AAB APP A partir de : V01.00.09...
Page 6
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 Déclaration UE de Conformité Nous adeunis 283 rue LOUIS NEEL 38920 Crolles, France 04.76.92.01.62 www.adeunis.com Déclarons que la DoC est délivrée sous notre seule responsabilité et fait partie du produit suivant : Modèle produit : FIELD TEST DEVICE SIGFOX 868 Référence :...
Page 7
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 INTRODUCTION Tous les droits de ce manuel sont la propriété exclusive de ADEUNIS. Tous droits réservés. La copie de ce manuel (sans l’autorisation écrite du propriétaire) par impression, copie, enregistrement ou par tout autre moyen, la traduction de ce manuel (complète ou partielle) pour toute autre langue, y compris tous les langages de programmation, en utilisant n’importe quel dispositif électrique, mécanique, magnétique, optique, manuel ou autres méthodes, est interdite.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 RECOMMANDATIONS ENVIRONNEMENTALES Tous les matériaux d’emballage superflus ont été supprimés. Nous avons fait notre possible afin que l’emballage soit facilement séparable en trois types de matériaux : carton (boîte), polystyrène expansible (matériel tampon) et polyéthylène (sachets, feuille de protection en mousse). Votre appareil est composé...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 RECOMMANDATIONS D’USAGE • Avant d’utiliser le système, vérifiez si la tension d’alimentation figurant dans son manuel d’utilisation correspond à votre source. Dans la négative, consultez votre fournisseur. •...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 1. PRÉSENTATION DU PRODUIT 1.1. Description Le Field Test Device (FTD) d’Adeunis est un produit compatible sigfox Class 0. Ce n’est pas un produit point à point et il ne peut pas être utilisé dans ce sens.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 1.3. Spécifications techniques Radio Communication Protocole sigfox et DBPSK sigfox Débit Radio 100bps Fréquence ISM band 863-870MHz Puissance RF 14dBm (25mW) Sensibilité down to -126 dBm Portée (Champ Libre) Up to 15km Conformité...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 3. DESCRIPTION DES ECRANS L’écran LCD du produit est divisé en plusieurs écrans : • L’écran de DEMARRAGE (Affichage des versions de firmware) - Uniquement à la mise sous tension •...
Page 14
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 Le cycle sigfox se décompose en plusieurs étapes : • 3 émissions sur une fréquence variable (Figure 6, 7 et 8) • 1 ouverture d’une fenêtre de réception après un temps de 20 secondes (Figure 9) •...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 3.3. Ecran GPS Cet écran est accessible par un appui court sur le bouton poussoir 2 après le menu principal. Il permet de visualiser les informations de fonction- nement du module GPS, ainsi que le positionnement GPS du produit.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 L’écran affiche : • Le nombre de trames envoyées (UL COUNT), y compris les répétitions • Le nombre de trames reçues (DL COUNT) • Le Packet Error Rate (PER) en pourcentage La mesure du PER est réalisée en comparant le nombre de trames émises par rapport au nombre de trames reçues : •...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 4.2. Température Binaire N° Bit N° Commentaires Valeur 0001 Température en °C (Complément à 2) -128 ... +127 1011 Aide au décodage de la température Bit de signe Bit 6 Bit 5 Bit 4...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 4.5. Compteur UL Décimal N° Bit N° Commentaires Valeur Compteur de trame d’Uplink 0 ... 255 Attention : Ce compteur n’est pas le compteur de trame de la stack sigfox, mais un compteur de trame interne. Il n’y a donc pas de corréla- tion entre ce compteur et celui que vous pouvez visualiser sur le réseau.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 5. CONFIGURATION DU PRODUIT La configuration du produit se fait au moyen du connecteur USB. Cette connexion permet de communiquer avec le produit par un port com virtuel et d’envoyer des commandes AT pour modifier les paramètres du produit.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 5.2. Mode commande Utiliser un terminal port COM pour communiquer avec le produit. Nous utilisons le soft terminal port COM HERCULES disponible en téléchargement gratuit à l’adresse suivante : https://www.hw-group.com/products/hercules/index_en.html •...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 • Envoyer la trame de passage en mode commande pour basculer le produit en mode de configuration, en cliquant sur le bouton SEND. Après quelques secondes, vous devez voir apparaître sur le LCD du produit l’écran COMMAND MODE. Cela peut prendre un peu de temps car le passage en mode commande ne peut être réalisé...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 Exemple d’une suite de commandes et de réponses correspondantes telles qu’on pourrait le voir sur un terminal : Syntaxe de la Commande Description Syntaxe de la réponse à la ligne suivante \FF\FF\FF\FF+++ Demande d’entrée en mode commande E ->...
Page 23
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 Valeur par Registre Contenu Commentaires défaut 0 : Désactivé S385 Payload personnalisée 1 à 16 : Taille de la payload personnalisé S386 Payload personnalisée - Bloc 1 S387 Payload personnalisée - Bloc 2 Chaque bloc permet de définir 4 octets de la payload...
Page 24
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 S385 : Payload personnalisée Cette option permet au produit d’émettre une trame personnalisé à la place de la payload prédéfinie du produit. L’utilisateur peut configurer la taille de sa payload et le texte à envoyer. Lorsque la valeur du registre est à...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 6. MISE À JOUR PRODUIT Les versions firmware du produit peuvent être mises à jour. Le produit possède 2 firmware qui peuvent être mis à jour individuellement : Firmware RTU Firmware APPLICATIF Les références des versions chargées dans le produit peuvent être connues avec la commande AT/S...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 INFORMATIONS Document Information Title FIELD TEST DEVICE Subtitle sigfox Europe Document type User Guide Version V1.1.3 This document applies to the following products: Référence Version Firmware FIELD TEST DEVICE - sigfox Europe Up to : ARF8121AAB APP Up to : V01.00.09...
Page 28
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 EU Declaration of Conformity adeunis 283 rue LOUIS NEEL 38920 Crolles, France 04.76.92.01.62 www.adeunis.com Declare that the DoC is issued under our sole responsibility and belongs to the following product: Apparatus model/Product: FIELD TEST DEVICE SIGFOX 868 Type:...
Page 29
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 INTRODUCTION All rights to this manual are the exclusive property of Adeunis. All rights reserved. Copying this manual (without written permission from the owner) via printing, copying, recording or by any other means, translating this manual (in full or partially) into any other language, including all programming languages, using any electrical, mechanical, magnetic or optical devices, manually or any by other methods, is prohibited.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 ENVIRONMENTAL RECOMMENDATIONS All superfluous packaging materials have been eliminated. We have done everything possible to make it easy to separate the packaging into three types of materials: cardboard (box), expanded polystyrene (filler material) and polyethylene (packets, foam protective sheets). Your device is composed of materials that can be recycled and reused if it is dismantled by a specialist company.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 RECOMMENDATIONS REGARDING USE • Before using the system, check that the power supply voltage shown in the user manual corresponds to your supply. If it doesn’t, please consult your supplier.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 1. INTRODUCING THE DEVICE 1.1. Description The Field Test Device (FTD) from Adeunis is a Class 0 sigfox compatible device. This is not a point to point device and may not be used in this manner.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 1.3. Technical specifications Radio Communication sigfox protocol and DBPSK sigfox Radio Rate Variable (SF12/125kHz (~183 bps) to FSK (~50kbps) Frequency ISM band 863-870MHz RF Power 14dBm (25mW) Sensitivity Down to -140 dBm in SF12/CR4 Range (Open)
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 3. SCREEN DESCRIPTION The LCD screen of the product is split on few part : • The START screen (Showing the firmware version) - Only on the powering up •...
Page 36
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 The sigfox cycle can be split in several stages : • 3 emissions on a variable frequency (Figure 6, 7 et 8) • 1 reception windows after a 20 seconds times break (Figure 9) •...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 3.3. GPS screen This screen can be accessed by briefly pressing on pushbutton 2 after the home screen. It will allow you to view the functioning information of the GPS module, as well as the device’s GPS positioning.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 The screen will display: • The number of frames sent (UL COUNT), including repetitions • The number of frames received (DL COUNT) • The Packet Error Rate (PER) as a percentage The PER measurement is calculated by comparing the number of frames transmitted to the number of frames received: •...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 4.2. Temperature Binary N° Bit N° Comments Value 0001 Temperature in °C (Additional to 2) -128 ... +127 1011 Aid for decoding temperature Sign Bit Bit 6 Bit 5 Bit 4 Bit 3...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 4.5. UL counter Decimal N° Bit N° Comments Value Uplink frame counter 0 ... 255 Please note: This counter is not the sigfox stack frame counter, but an internal frame counter. Therefore, there is no correlation between this counter and the one that you can view on the network.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 5. DEVICE CONFIGURATION The device can be configured using the USB connector. This connection allows you to communicate with the device via a virtual com port and to transmit AT commands in order to modify the parameters of the device.
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 5.2. Command mode Use a COM port terminal in order to communicate with the device. We use the HERCULES COM port soft terminal available to download for free by clicking on the following link: https://www.hw-group.com/products/hercules/index_en.html •...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 For Hercules, this frame must be entered in one of the 3 lines available at the bottom. The hexadecimal format must be expressed using a “$” in this program, which gives us the following frame: $FF$FF$FF$FF$FF$2B$2B$2B •...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 Example of a set of commands and corresponding responses that can be seen on the terminal: Command syntax Description Response syntax \FF\FF\FF\FF+++ Input request in command mode ATS202=3 The number of repetition change E ->...
Page 45
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 Range Content Default value Comments Personalize Payload Text - Bloc 1 S386 Personalize Payload Text - Bloc 2 S387 Each bloc allow to define 4 bytes of the payload The data enter in the last bloc will be not take in charge Personalize Payload Text - Bloc 3 S388...
Page 46
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 Range Content Default value Comments S200 Transmission frequency 868130000 From 862000000 to 870000000 (Test mode) S201 Reception frequency 869525000 From 862000000 to 870000000 (Test mode) S202 Number of repetitions From 0 to 2 (only available in BIDIR mode) S230...
FIELD TEST DEVICE - sigfox Europe - Guide utilisateur / User guide version V1.1.3 6. DEVICE UPDATES The firmware versions of the device can be updated. The device has 2 firmwares that can be updated individually: RTU firmware APPLICATIVE firmware It is possible to find out the references for versions loaded onto the device using the command AT/S Example : 8121AAB_PRG_1701_V01.00.09:8120AAB_PRG_1701_V01.00.01...
Need help?
Do you have a question about the FIELD TEST DEVICE sigfox Europe RC1 and is the answer not in the manual?
Questions and answers