Operating The Cleaner; Power Cord - Samsung DJ68-00369L Operating Instructions Manual

2

OPERATING THE CLEANER

2-1. POWER CORD

2-2. POWER CONTROL (INFRARED CONTROL)
1) REMOTE CONTROL TYPE
- HOSE
SENDER
HANDLE CONTROL
[The cleaner is controlled by using
infrared signals.]
- BODY
OPTIONAL - DIGITAL SIGNAL
POWER ON/OFF
RECEIVER
The IR light indicates the part
that receives the infra-red signal
from the handle control.
The filter light is illuminated when the dust pack
requires checking or emptying. An audio signal will
also sound.
1. Vacuum cleaner ON/OFF (
Press the ON/OFF button to operate the vacu-
um cleaner. Press again to stop the vacuum
cleaner.
2. Vacuum cleaner (+ , -)
Press the (+) button to operate the vacuum to
highsuction power. Press the (-) button to oper-
ate the vacuum to low suction power.
NOTE :
Don't cover the handle sender when
you use a handle control button.
Press the power ON/OFF button repeatedly to
start and to stop the vacuum cleaner
(OFF → ON → OFF)
NOTE :
If the remote handle control is not
working, the cleaner can be operated
using the ON/OFF button on the body
of the machine.
The ON/OFF button operates the
vacuum cleanner or stops it.
3
NOTE
When removing the
plug from the
electrical outlet, grasp
the plug, not the cord.
)