MAKING A CALL
For making or receiving calls the handset has to be subscribed to a system
(
shown in the display, see Create Subscription section).
Press the
key, the
icon in the display will flash until connection is estab-
lished.
Dial the number.
Pre-Dial
Press the number to dial (long press on
<
Press and hold
key to delete last digit.
Press the
key, the
icon in the display will flash until connection is estab-
lished.
Telephone Book
>
Press the
key
to enter the telephone book.
Search for the number either by using the
first letter in the name by using the digits
Press the
key, the
icon in the display will flash until connection is estab-
lished.
Redial
Redial / CLIP (CLIP = Calling Line Identification Presentation) stack:
<
Press the
key
to enter the redial/CLIP stack.
Search for the number by using the
marked with REDIAL or name and clip numbers are marked either with CLIP or the
name of the person who called and the LED is on.
Press the
key, the
icon in the display will flash until connection is estab-
lished.
will make a pause, if necessary)
<
>
key or the
key or by pressing the
1-9
(refer to the Key Functions section).
<
>
key or the
key, redialed numbers are
Using the handset on residential systems:
Internal Call Post-Dial:
ALT
Press the
key
Dial the number of another handset on the base station, the
until the connection is established.
Internal Call Pre-Dial:
Press the number of another handset on the base station.
ALT
Press the
key
RECEIVING CALLS
If the phone rings, the call can be answered by pressing the
When ringing the LED flashes fast, and the display shows the CLIP (if presented).
If it is an external call (or if no CLIP) the display shows:"INCOMING CALL" .
It is possible to stop the ringing signal without answering the call. Press the
key (
) and the ringing signal is muted. The display shows:"RINGER MUTED" .
If the handset is used with a headset, it is possible to answer a call by pressing any
key on the handset.
DURING A CONVERSATION
Volume Adjust
Use the two keys placed at the right side of the handset for volume control.
Microphone Mute
OK
Press the
key (
OK
Press the
key (
7
8
, the icon
in the display will flash.
the
icon will flash until the connection is established.
), MIC. MUTED is showed in the display.
) to enable the microphone again.
icon will flash
key.
OK