Insert the USB cable into the Charging Head (2).
2.
Insert the USB cable into the device's Charger/Accessory
3.
Port (3).
Correct
Charger/Accessory
Port
Plug the Charging Head into a standard AC power outlet.
4.
When charging is complete, unplug the Charging Head
5.
from the power outlet and remove the USB cable from the
device.
Incorrect
Turning Your Device On and Off
Turning Your Device On
Press and hold the Power/Lock Key
For more information, refer to "Unlocking the Device" on
page 10.
Note: Your device's internal antenna is located along the top back of the
device. Do not block the antenna; doing so may affect signal quality
and may cause the device to operate at a higher power level than is
necessary. For more information, refer to "GPS Applications" on
page 104.
.
Getting Started
7