Assembling Your Keyset - Samsung 7200 User Manual

ASSEMBLING YOUR KEYSET

• Place the keyset face down on a flat surface.
• Remove the base pedestal by placing your thumbs over the attachment clips
and press outward while simultaneously pressing down on the keyset body
with your fingertips.
• Plug the handset cord into the jack marked with the
• Route the handset cord out the RIGHT side of the keyset as you look at it face
down.
• Reattach the base pedestal.
• Plug the line cord into the jack on the base of the keyset marked with the
symbol and route it through one of the cable channels in the bottom
of the base pedestal.
•
•
symbol.
•
•
•
•
•
11 12
ADDING AN
iDCS 14 BUTTON KEY STRIP
Place the keyset face down on a flat surface.
Remove the base pedestal by placing your thumbs over the attachment clips
and press outward while simultaneously pressing down on the keyset body
with your fingertips.
Remove the ribbon cable knockout from the bottom of the keyset.
Clip the 14 button strip to the side of the keyset.
Plug one end of the ribbon cable into the keyset and the other end into the
14 button strip.
Place the support bracket over the ribbon cable and secure with the six
screws provided.
Reattach the base pedestal.
REMOVE KNOCKOUTS
CONNECT RIBBON CABLE