Advertisement
KT2
Adjustable Height &
Angle Keyboard Tray
H
4
G
4. Attach the Keyboard Panel (C) to the mounting
panel with 4 H Screws & 4 G nuts.
7
7. Press down to tilt the Mouse Pad and adjust its' angle.
If the mouse pad is too loose, tighten the 2
screws on the mouse pad mounting bracket.
ASSEMBLY & OPERATING INSTRUCTIONS:
5
H
G
5. Connect the metal Mouse Pad Bracket to the keyboard tray
using 2 H Screws & 2 G Nuts.
5A. Connect the Mouse Pad to the Mouse Pad Bracket
using 2 H Screws & 2 G Nuts.
8
8B
8. The Keyboard Tray slides in/out by pushing/pulling.
8A. To adjust the Keyboard Tray's angle, release the lever under the keyboard tray.
8B. To raise/lower the Keyboard tray, squeeze the handle under the front of the
keyboard tray. Release it to lock the keyboard tray in place.
5A
6
6. The Mouse Pad (D) attaches to the right or left side of the Keyboard
Tray (C). Release the thumb screw on the attachment to move the Mouse
Pad closer to or farther away from the Keyboard tray.
9
8A
9. KT2 is adjustable from below your desk to above your desk. For fast adjusting:
remove your mouse, release the lever (8A) & squeeze the handle (8B).
When you've reached the perfect height, release the handle and then tighten the
lever.
www.UncagedErgonomics.com
D
C
2
Advertisement
