Bayer HealthCare Elite XL User Manual page 16

6
I2
Take the Test:
You need a Meter and
Test Strip.
1. After washing your hands with
warm soapy water and drying
thoroughly, open a foil packet
and remove the Test Strip.
2. With the Meter off, hold the
round end and insert the Test
Strip fully into the Meter. You
will hear a beep.
2. After a full display, the Code
Number (F#) and previous test
result begin flashing alternately.
3. Press Microlet firmly against
puncture site and push button
to release. Form a small, round
drop of blood.
4. Touch and hold the TEST END
(tip) of the Test Strip to the drop
of blood until the Meter beeps.
The Test Strip is filled, and the
timer begins counting down
from 29 seconds.
Glucometer Elite
®
XL