Download  Print this page

Jigs And Tools Required For Adjustment - JVC HR-J271MS Service Manual

Hide thumbs

Advertisement

www.freeservicemanuals.info
2. In case of mechanical failure
If you cannot remove the cassette tape which is loaded be-
cause of any mechanical failure, manually remove it by tak-
ing the following steps.
(1) Unplug the power cable and remove the top cover, front
panel assembly and others so that the mechanism as-
sembly is visible. (See 1.3 DISASSEMBLY/ASSEMBLY
METHOD.)
(2) While keeping the tension arm assembly of the mecha-
nism assembly free from tension, pull the tape on the pole
base assembly (supply or take-up side) out of the guide
roller. (See Fig.2-1-3c.)
(3) Take the spring of the pinch roller arm assembly off the
hook of the press lever assembly, and detach it from the
tape. (See Fig.2-1-3d.)
(4) In the same way as in the electrical failure instructions in
2.1.3-1(4), remove the top guide.
(5) Raise the cassette tape cover. By keeping it in that posi-
tion, draw out the cassette tape case from the cassette
holder and take out the tape.
(6) By hanging the pinch roller arm assembly spring back
on the hook, take up the slack of the tape into the cas-
sette.
Pole base assembly
(supply side)
Tension arm assembly
Guide pole guard
Pole base assembly (take-up side)
Fig. 2-1-3c
Pinch roller arm assembly
Press lever assembly
Fig. 2-1-3d
Digitized in Heiloo Netherlands

2.1.4 Jigs and Tools Required for Adjustment

Roller driver
PTU94002
Back tension cassette gauge
PUJ48076-2
Alignment tape
(SP, stairstep, PAL)
MHPE
Take the spring
off the hook, and
detach it from the
tape.
1/21/2018
A/C head positioning tool
Torque gauge
PTU94010
PUJ48075-2
Jig RCU
PTU94023B
Alignment tape
(LP, stairstep, PAL)
MHPE-L
2-2

Advertisement

Table of Contents

   Also See for JVC HR-J271MS

   Related Manuals for JVC HR-J271MS

This manual is also suitable for:

Hr-j471msHr-j777msHr-j677ms

Comments to this Manuals

Symbols: 0
Latest comments: