Download  Print this page

Advertisement

USER SETTINGS
Go on adjusting the burner.
Users can set only the LMV parameters that can be accessed without password: (see "Adjusting the temperature set-point").
The Siemens AZL User Interface allows programming the Siemens LMV control box and monitoring the system data.
The user interface is made of:
1. display: it showes menus and parameters
2. ESC key (previous level): it goes back to the prevoius level menu or exits the programming mode without changing data.
3. ENTER key (next level): it confirms the data changing and jumps to the next menu/parameter.
4. SELECT keys: they select a menu item and change the parameter values.
To know the actuator functions, proceed as follows:
1
remove the actuator covers
2
check the number of the LV green LED blinks for each actuator:
Blinks
1 blink
2 blinks
3 blinks
4 blinks
5 blinks
6 blinks
CAUTION: it is recommended not to adjust the actuators. Anyway, never press the actuator red button, otherwise the fun-
damental parameters, necessary for the burner operation, will be cancelled. The burner will therefore continuously lock out.
1
2
3
LV
Actuator function
air damper actuator
gas butterfly valve actuator
oil pressure governor actuator
auxiliary actuator
auxiliary actuator
auxiliary actuator
4
4

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: