Samsung SBC-300AP User Manual

Digital b/w camera
Hide thumbs Also See for SBC-300AP:

Advertisement

Quick Links

CAUTION
RISK OF ELECTRIC
SHOCK, DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash, with an arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence of
uninsulated "dangerous voltage" within the
product's enclosure, that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instruction in the
literature accompanying the appliance.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT SAFEGUARDS
i
User Guide
1. Read all of these instructions.
2. Save these instruction for later use.
3. Unplug this appliance system from the wall
4. Do not use attachments not recommended by
5. Do not use this appliance near water for
6. Do not place this appliance on an unstable cart,
outlet before cleaning
Do not use liquid cleaners or aerosol cleaner.
Use a damp cloth for cleaning.
the appliance manufacturer, as they may cause
hazards.
example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a
swimming pool, etc.
stand, or table.
The appliance may fall causing serious injury to
a child or adult, and serious damage to the
appliance.
Use only with a cart or stand recommended by
the manufacturer's instructions, and use a
mounting kit approved by the manufacturer.
An appliance and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may
cause the appliance and cart
combination to overturn.
ii
User Guide

Advertisement

Table of Contents
loading

Summary of Contents for Samsung SBC-300AP

  • Page 1 CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash, with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 2 7. Slots and openings in the cabinet on the back or bottom are provided for ventilation, to insure reliable operation of the appliance, and to protect from overheating. These openings should never be blocked by placing the appliance on a bed, sofa, rug or other similar surfaces.
  • Page 3: Table Of Contents

    Function Switches ... 16 5. Product Specification ... 19 User Guide 1. Introduction Samsung CCTV B/W Camera (SBC-330A(P) /331A(P)/300AP/301AP) is a surveillance camera that employs the latest CCD technology and can be connected to a CCTV system to provide the best surveillance capabilities.
  • Page 4: Features

    2. Features High Sensitivity Adopting the 1/3" Super HAD CCD that has the latest built-in microchip lens, the high sensitivity is realized. Excellent Back Light Compensation The built-in backlight compensation (BLC) function provides a clear, sharp image even when monitoring strongly backlit subjects.
  • Page 5: Connecting Auto Iris Lens Connector

    User Guide Connecting Auto Iris Lens Connector Prepare the following Auto Iris Lens Connector supplied with the camera. Pin3 Pin1 Pin4 Pin2 Connect the cable of the control cable, whose covering is stripped, to the Auto Iris Lens Connector as shown below. Pin Number DC Control Type Video Control Type Damp(-) Power Source (+9V)
  • Page 6: Setting Lens Selection Switch

    Setting Lens Selection Switch When lens mounting is completed, set the Lens selection Switch on the rear of the camera according to the mounted lens type. When the mounted lens is an Auto Iris Lens of the DC control type, set the Lens Selection Switch to "DC".
  • Page 7: Connecting Cable

    User Guide The following describes how to adjust the Back Focus when using a Zoom lens. Lightly loosen the screw fixing the Back Focus Adjustment Ring using a screwdriver. Image a vivid subject (with check patterns) at a distance of 3~5m away and adjust the zoom of the lens to TELE as far as it goes.
  • Page 8 User Guide AC24V/DC12V Power Input Camera. Connect 2 lines of the power adapter using a Phillips screwdriver to the Power IN Terminal of the camera as shown below. ※ Without the distinction of the polarity, connect to the AC 24V or AC 12V power source. V ID L E N AC24V...
  • Page 9: Names And Functions Of Parts

    4. Names and Functions of Parts Names and Functions of Parts • Side View Groove for Mount Adapter Auto lris Lens Connector Flange-Back Adjustment Ring V ID L E N ALC Lens Selection Switch Auto Iris Lens Control Cable Groove for Mount Adapter Use this groove for fixing the mount adapter to be connected to the bracket with screws to mount the camera on the bracket.
  • Page 10: Function Switches

    • Rear Panel AC24V/DC12V Power Input Camera AC 24V VIDEO OUT DC 12V AC230V Power Input Camera User Guide Power Connection Terminal Terminal to be connected to the power (adapter) cable- Connect it to AC 24V or DC 12V. Power Indication LED While the power is properly supplied to the camera, the LED is turn on.
  • Page 11 User Guide 1) SW1(L/L): If this switch is set to OFF, the camera will operate in the internal synchronization mode, and if the switch is set to ON, the camera will operate in the line lock mode. If you are monitoring in the automatic switching mode with multiple cameras connected to a sequential switcher, and the cameras are set to INT (internal synchronization) mode, then picture...
  • Page 12: Product Specification

    5. Product Specifications SBC-330A/331A Item Contents Product Type CCTV B/W Camera Broadcasting EIA STANDARD SYSTEM System 1/3” IT type S-HAD CCD No. of Pixel 330A : 510(H) x 492(V) 331A : 768(H) x 494(V) Scanning Type 525 Line, 2:1 Interlace Frequency INTERNAL : 15,750 H 60 H...
  • Page 13 SBC-330AP/331AP/300AP/301AP Item Contents Product Type CCTV B/W Camera Broadcasting CCIR STANDARD SYSTEM System 1/3” IT type S-HAD CCD No. of Pixel 330AP/300AP : 500(H) x 582(V) 331AP/301AP : 752(H) x 582(V) Scanning Type 625 Line, 2:1 Interlace Frequency INTERNAL : 15,625 H 50 H LINE LOCK :15,625 H 50 H...
  • Page 14 Part No.: AB68-00346A (Rev. 01) Printed in Korea Digital B/W Camera SBC - 330A / 330AP SBC - 331A / 331AP SBC - 300AP / 301AP User Guide...

This manual is also suitable for:

Sbc-301apSbc-330aSbc-330apSbc-331aSbc-331ap

Table of Contents