CHECKING THE WATER DISPENSER LINE
1) In order to operate the ice maker properly, water pressure of 1.4 ~10㎏f/㎠ is required.
In this range a 100 cc paper cup can be filled in 10 secs.
2) The water filter removes particles. It does not sterilize or destroy any micro-organisms.
3) If the refrigerator is installed in an area with low water pressure (below 1.4㎏f/㎠ ), you should install
a booster pump to compensate.
4) Ensure the water storage tank inside the refrigerator is properly filled initially. Push the water dis-
penser lever until the water runs from the outlet.
Water line installation kit is available at extra cost from your dealer. The refrigerator
manufacturer recommends using a water supply kit containing copper tubing.
NOTE
Checking the Parts
Basic parts
Optional parts
Tapping screw
Water Filter
12EA
×
Water pipe
27
Wrench
Clamp
12EA
×