Advertisement
Network it [Wi-Fi]
6
Use App Store (IOS devices) or Google Play (Android devices) to download WiSound application (Wi-Fi connection and internet access are required).
Run the App and follow on screen guide to setup network.
To add the first speaker in your network:
1. Press Add Device button
2. Type the password of your wifi network
and press next
4. The App searches the speaker
5. You can now select the speaker's name
and automatically adds it to your network
or set a custom one
Note: If you use Ethernet connection, instead of Wi-Fi the above procedure is not required. You just need to run the App and the speaker is already there!
Table below summarizes the network status depending on LED:
Useful:
If there is no Wi-Fi router available, you can connect your phone/tablet directly to the speaker's network. Typically the name is TeevyX_YY and the default
password is Wisound1234. You are strongly advised to change this password through the App or through your speaker's web interface (10.10.10.254,
under Network tab)
Group It
7
In the list of the available speakers, grab and drag one speaker and drop
it over another speaker. In this way, this speaker (slave) becomes part of a
group and Master's music is also played through all the Slave speakers.
Useful:
• You can make one or more groups
• You can have more than one Slave speakers under the same Master
• In a Group, even if the source is Optical / Line in / Bluetooth, you can listen to Slave speakers playing the same song as the Master speaker (Redirect feature)
• You can simultaneously control the volume of all the speakers in a group by using Volume buttons of your phone/tablet
• For a Group configuration, choose which speaker can play Left (L) , Right (R) or Left/Right (LR), by touching the relevant icon.
3. Press the WPS button on the back of your
speaker and press next
6. To add more speakers, press + on the top
right and repeat steps 1-5
If you want to ungroup, just grab and drag the slave speaker below the
middle line. Slave speaker becomes Master speaker and can play differ-
ent music.
Learn it
8
You can control Teevy's volume with your TV's remote control. To learn your TV's remote to Speaker:
1. Keep pressed LEARN button on remote
2. Press either Vol+ on speaker's remote (LED
for about 2 seconds (LED slow blinking)
fast blinking)
4. Repeat steps 1-3 for Vol-
Νοte: Some TV remotes may not be compatible with Learning function
Play it
9
Music Selection
• Select your local songs or USB songs through My Music
• Access Web Radio through TuneIn
• Change Input through Line In / Bluetooth / Optical
• Search for online songs through Search
• Access your Favorites through Favorites
• Access Web services (Pandora/Spotify/Deezer) by touching the corresponding icons (region dependent)
Useful:
Your friends/guests can stream their music to the entire group of speakers without downloading any Apps or having to connect to your sensitive Wi-Fi
network. Just ask them to pair their phones/tablets via Bluetooth to the Master speaker!
Preset it
10
To assign web radio stations to preset buttons (up to 6 stations can be assigned):
1. Select TuneIn
2. Browse your favorite station
Any time wishing to access the preset web radio stations, simply select Wi-Fi as input and press the relevant button on the remote.
Charge it
You can charge any USB powered device.
11
Just plug it to your Teevy's USB Power Out.
3. Press relevant Vol+ on TV's remote (LED
stops blinking)
VOL
CH
Now playing
Available speakers
3. Press the small icon next to the
4. Select the required preset number
web radio station
CrystalAcoustics.com|WiSound.com
WirelessMultiroom.com
Advertisement
