Connecting A Digital Audio System; Connecting To An Analog Amplifier - Samsung HC-R4745W Owner's Instructions Manual

Samsung projection television owner's instructions
Hide thumbs Also See for HC-R4745W:
Table of Contents

Advertisement

I
N S TA L L AT I O N

Connecting a Digital Audio System

There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below. For more information, see your
audio system owner' s manual.
1
If your audio system has a coaxial digital audio input, connect
to the "COAXIAL OUT" jack on the TV.
2
If your audio system has a optical digital audio input, connect
to the "OPTICAL OUT" jack on the TV.
Be certain to remove the black cover from the optical output
before inserting the cable.
3
If your system has both coaxial and optical digital audio inputs,
SAMSUNG recommends you use the optical digital output on
the TV.
Do not connect both optical and coaxial cables. This may
damage your audio system.
• OPTICAL: Converts the electric signal into an optical light signal, and transmits it through glass fibers.
A transmission system of digital audio in the form of a light wave, S/PDIF format using a glass
conductor.
• COAXIAL: The digital audio signal is received through a coaxial copper cable.

Connecting to an Analog Amplifier

1
The "AUDIO OUT" terminals cannot be used for
external speakers. You must hook them up to an
amplifier.
When an audio amplifier is connected to the
"AUDIO OUT" terminals: Decrease the gain
(volume) of the audio amplifier, and adjust the
volume level with the volume control on the TV.
English - 22
TV Rear Panel
1
or
2
Audio
System
TV Rear Panel

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hc-r4355wHc-r5245wHc-r4755wHc-r4245w

Table of Contents