Panasonic KX-TGD590C Operating Instructions Manual page 38

Programming
*6 For CELL 2
*7 The preset melodies in this product ("Tone 3" - "Melody 10") are used with permission of
© 2004 - 2013 Copyrights Vision Inc.
*8 The preset melodies in this product ("Tone 1" and "Tone 2") are used with permission of
© 2013 Copyrights Vision Inc.
*9 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID auto". To turn this feature off, select
"Manual". (Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*10 If you subscribe to a distinctive ring service, select a tone (tone 1 or 2). If you select a
melody, you cannot distinguish lines by their ringers.
*11 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select "On", the tone sounds 2 times.
*12 This setting is available when you have the key detector (KX-TGA20). Read the installation
manual for more information on the key detector.
*13 For models with supplied key detectors, the display shows "1: Detector1".
*14 If you register 2 or more key detectors.
*15 If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*16 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*17 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to "A" if telephone line condition is not good.
For assistance, visit www.panasonic.ca/english/support
38
KX-TG273CSK_(en-en)_0525_ver110.pdf 38 2018/06/02 10:39:10