Siemens SIMATIC ET 200SP Manual page 57

Analog input module ai 8xrtd/tc 2-wire hf 6es7134-6es7134-6jf00-0ca1
Hide thumbs Also See for SIMATIC ET 200SP:
Table of Contents

Advertisement

Parameter data record
A.1 Dependencies when configuring with GSD file
Meas-
Measuring
urement
range
type
Thermo-
Type B, N,
couple
E, R, S, J,
L, T, K, U,
C, TXK
x = property is allowed, – = property is not allowed, * = property is not relevant
Use of the "Reference channel of the module":
1
- Channel 0 must be set to "Pt100 climatic" with the temperature unit "Degrees Celsius".
- For each TC channel of this module that is intended to use channel 0 as reference, "Reference junction" must be set to
"Enable".
Use of "Reference channel of group 0":
2
- An RTD channel must be configured as "Pt100 climatic" with temperature unit "Degree Celsius".
- "Reference channel of group 0, 1, 2, 3" must be configured as the "Reference junction" of this channel.
- There must only be one RTD channel with "Reference junction activated" = "Enabled" per group and line!
- Each TC channel of this line which is to use this reference must be configured with "Enabled" for "Reference junction
activated".
Underflow = 8000
; wire break and overflow lead to 01
3
H
therefore not relevant.
56
Tempera-
Slot refer-
ture coeffi-
ence junc-
cient
tion
*
Reference
channel of
the module
1
Internal
reference
junction
Reference
channel of
group 0, 1,
2, 3
2
Fixed refer-
ence tem-
perature
Tempera-
ture unit
Underflow /
overflow
Degrees
x
Celsius
Degrees
Fahrenheit
Kelvin
Degrees
x
Celsius
Degrees
Fahrenheit
Kelvin
(triggered) → (no diagnostics), wire break and overflow are
H
Analog input module AI 8xRTD/TC 2-wire HF (6ES7134-6JF00-0CA1)
Diagnostics
Wire break
Missing
supply
voltage L+
x
x
x
x
Manual, 09/2018, A5E32942580-AB
Reference
junction
x
*

Advertisement

Table of Contents
loading

Table of Contents