Wiring
3.1
Wiring and block diagram
This section includes the block diagram of the AI 8xRTD/TC 2-wire HF module with the
terminal assignments.
You can find information on wiring the BaseUnit in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Note
• The load group of the module must begin with a light-colored BaseUnit. Keep this in mind
also during the configuration.
• When using floating sensors, bridge the m- connections and connect to ground / FE. This
increases the immunity of the module.
Bridging and connecting are not necessary for disabled and disconnected inputs.
14
Analog input module AI 8xRTD/TC 2-wire HF (6ES7134-6JF00-0CA1)
3
Manual, 09/2018, A5E32942580-AB