System Reset - Roberts Play M2 Manual

System reset

If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press the On/Off button to switch on the radio.
2. Press the Menu/Mode button. The main menu will show on the display.
3. Press the Tuning Up or Down buttons until 'SYSTEM' appears on
the display. Press the Select button.
4. Press the Tuning Up or Down buttons until 'FACTORY' appears on
the display. Press the Select button. 'RESET' will show on the display.
5. Press the Select button.
6. A full reset will be performed. The station list and presets will be erased.
The display will show 'RESTART' then 'WELCOME' and after a few
seconds a station scan search will be performed automatically. The
display will show the progress of the station search. The number on
the right of the display is the number of stations that have been found.
Electro-magnetic compatibility advice
In the event of a malfunction due to electrostatic discharge, mains power
supply transients or short interruptions, reset the product as above to
resume normal operation. If you are not able to perform the reset operation
as above, removal and reconnection of the power supply and batteries
may be required.
If the product is used in an environment with any ESD Immunity / Radiated
Immunity / Conducted Immunity disturbance, the product may malfunction.
It will automatically recover to normal when the ESD Immunity / Radiated
Immunity / Conducted Immunity disturbance is stopped.
1
2
3,4
3,4
3-5
20