Mp3,wma,asf,secure wma and ogg playback removable storage device direct mp3 recording fm reception 3d sound usb 2.0 support upgradable 42 hours of continuous play voice recording function (32 pages)
Page 1
- MP3, WMA , ASF and Ogg Playback - Removable Storage Device - Direct MP3 Recording - FM Reception - 3D Sound - USB 2.0 Support - Upgradable - 20 Hours of Continuous Play - Voice Recording Function AH68-01633A (Rev 0.0)
Contents Preparations Safety Instructions...4 Features ...6 Components ...8 Location of Controls ...9 Connection to Computer Connecting the player to PC ...11 Manual Installation of USB Driver ...15 Using the removable storage(PC)...18 G Downloading/Uploading files ...18 G Disconnecting the USB cable...18 G Formatting ...19 Installing yepp Studio ...20 To View Help on yepp Studio ...21...
Safety Instructions Read and understand all the instructions to avoid injury to yourself and damage to the equipment. Do not expose to extreme temper- Do not subject the unit to severe atures (above 95°F or below 23°F). impact, or place heavy objects Do not expose to moisture.
Upgradable You can upgrade the built-in programs when available. Add functions, CODEC, etc. Please check the home page (www.samsung.com) for upgrades. 20 Hours of Continuous Play This player uses one AAA/LR03 alkaline battery. Operation can last up to 20hours. Actual playing time may vary according to the type and capacity of the battery.
Player One Battery Line In Cable USB Cable (1.5V AAA/LR03 type) Model YP-T6 H YP-T6 V Built-in memory 128MB 256MB G The capacity of the useable built-in memory is less than indicated as the internal firmware uses a part of the memory as well.
- If the YP-T6 program has not been installed in Windows 98, then it will not communicate with your removable disk. You must install the USB driver file first.
Page 7
You may not see the display screen during installation. Go to the device manager to check that installation has been successfully completed. Upon installation of the USB driver "Samaung yepp YP-T6 USB Device" will appear in the [System Properties] ➝ [Device Manager]. Connecting the player to PC command or initializing during USB driver installation, your PC may not function correctly.
How to check USB driver How to check USB driver Windows 98: ➝ System ➝ Device Manager ➝ Disk Drives ➝ Samsung yepp YP-T6 Control Panel Windows 2000: Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Disk Drives ➝...
Page 9
: You must reboot your computer to complete the installation. ✍ - You cannot use it as a removable disc in Windows 98 if the YP-T6 program is not installed. Make sure to install the USB driver file first. USB driver location...
Using the removable storage(PC) Downloading/Uploading files Connect the player to your PC with the supplied USB cable. Open Windows Explorer on PC. G Removable Disc is displayed in Windows Explorer. Select the file to save and drag-and-drop it into the removable disk icon. (In numerical, alphabetical order) G If you change the name of music files in Windows Explorer like 001* * * , 002* * *..., music files will be played in the order of number indicated.
Installing yepp Studio yepp Studio is the program that can convert and play back the music files in PC. Insert the Installation CD into CD-ROM drive. Select [Install yepp Studio]. Follow the instructions in the window to complete the installation. G Please refer to Help for more information on how to use yepp Studio.
Playing Music and Turning Off the Device Turning Power On and Off Power On : Press the button to turn on the power. Power Off : Press and hold the button to turn off the power. Playing Music (Power On) Press the button.
MP3 Encoding ✽ To move to other modes from LINE_ENC mode, refer to “Changing Mode”. Connect the Audio Output port on the external audio source (or the Line Out port) to the ENC port on the device with the Line cable. Press and hold the REC button to start MP3 encoding.
Listening to FM Radio First, press the key to display the menu screen and select FM Radio. Manual Search for a Frequency G Press the joystick left or right briefly to search manually for the frequency you want. Automatic Search for a Frequency G Press and hold the joystick left or right to search for and stop at frequencies with reception.
FM Encoding Press and hold the REC button during FM reception. G Encoding of the currently transmitted FM broadcast begins. Press the REC button again. G A file is created and the encoding stops. G Files are encoded in the order F001, F002, F003...and saved as MP3 files in FM_ENC folder.
Using Navigation You can easily search for files or switch modes using the Navigation function. Press the button to enter Navigation mode. or press and hold the button to move to Menu and then select Navigation in Menu. Select the file or folder that you want to play. : When moving to a higher-level folder.
Using Navigation Playing/Exiting Folder Playing Folder ¤ ¤ Press the button to move to the Navigation mode. to move to the folder you want and press the G When " " appears, the selected file will be played. Exiting Folder Play ¤...
Setting the Advanced Functions Select Settings in the MENU. (refer to “MENU Options”) In Settings, use to move to the function you want and press the button to select. G To move to a previous menu, use or select Return. Selecting the Playmode Select Play mode in Settings.
Setting the EQ mode Select My Sound in Settings. In My Sound, use to move to the sound mode you want and press button. Preset EQ G Use to move to the sound mode you want and then press the G SRS ¡...
Page 20
Setting the EQ mode User EQ Set G If User is selected in Preset EQ, EQ can be set to your preference in the User EQ Set. G Use to move to right or left and use adjust the level. Press the key after completing the setting.
Page 21
Display Backlight ¤ ¤ [ Jog ] G Use to set the Light-On time from Off to 60 seconds. G When set to On, the Light stays on continuously. [ LCD ] G Use to set the LCD Light-Off time from Off to 60 seconds G When set to On, the Light stays on continuously.
Setting the System Select System in Settings. Resume ¤ ¤ G Use to select Resume On or Off. G On: Play back music from the part of music you listened last if you play it back again after stopping. G Off: Play back music from the beginning of music if you play it back again after stopping.
Encoding Select Record in Settings. Bitrate ¤ ¤ G Use to set the encoding bit rate. G When encoding music into an MP3 file, you can select one of the following bit rates: 32Kbps, 48Kbps, 64Kbps, 96Kbps and 128Kbps. AutoSync ¤...
Managing Files Select File in Settings. Deleting Select Delete in File. to move to the file you want to delete and then press the button. to move to Confirm and then press the button. G The selected file will be cleared. Formatting Select Format in File.
G Check to see if the battery is inserted to the right poles ( + , – ) G After connecting it to PC, execute YP-T6 Updater in the desktop to update the product. In PLAY mode, music is not played after pressing the G Check to see if MP3 or WMA files are saved in the built-in memory.
Specifications Model YP-T6 Built-in Memory capacity 128MB(YP-T6 H), 256MB(YP-T6 V), 512MB(YP-T6 X), 1GB(YP-T6 Z) Voltage 1.5V X 1 (AAA/LR03 size alkaline battery) lasts up to 20hours (Alkaline battery, MP3 128Kbps, Vol level 15) Playing time Dimensions/Weight 22 X 55 X23 mm / 30 g (without battery)