Change The Working Mode - Philips AC4081 User Manual

Hide thumbs Also See for AC4081:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Note
After the appliance is switched off by the on/
, if the plug is still in the power
off button
socket, the appliance will resume working
based on the last settings when it is
switched on again.
Change the working mode
Besides operating under air purification
combined with humidification, the appliance can
also work under air purification only mode.
1
After the appliance is switched on,
press
once.
» The HUMIDIFY and humidity level
indicators go out.
» The humidification function is
deactivated. The appliance works under
air purification only mode.
2
Press
again to activate the humidification
function.
Note
In air purification only mode, the humidification
button
does not respond.
The appliance cannot work under humidification
only mode.
Set the sensitivity of the air
quality sensor
This appliance allows you to adjust the
sensitivity of the air quality sensor. There are
three sensitivity levels:
standard (default setting)
sensitive
extra sensitive
You can adjust the sensitivity of the air quality
sensor in the following way:
Note
When the appliance is set to a higher sensitivity,
the purifier becomes more allergic to the
pollutants in the air. When the purifier is in
AUTO mode, it is more likely to choose a higher
fan speed than the standard mode. The air
quality sensor selects the appropriate color of
the air quality light in accordance with the higher
sensitivity.
1
Unplug the appliance.
2
After a short while, put the plug in the wall
socket again.
3
Press and hold the fan speed button
and humidifier button
for 3 seconds.
» One or more fan speed lights flash to
show the current sensitivity level of the
air quality sensor.
3"
simultaneously
EN
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ac4080

Table of Contents