Download  Print this page

Dell PowerEdge FN Installation Manual page 11

I/o aggregator
Hide thumbs

Advertisement

Figure 2. System LED Displays (I/O Panel)
1 – System Status LED
2 – System Power LED
The following table lists the LED definitions for the aggregator.
Table 1. System LED Displays
System LED
LED Color/
Display
Green
Power
Off
Blue
Status
Off
Amber
NOTE: The front-end ports also contain LEDs that provide information about the link status and
traffic activity on a port.
NOTE: When the ingress air temperature exceeds 60°C, the Status LED turns amber and a major
alarm is triggered.
Table 2. SFP+ and 10G BaseT Port LEDs
Label
LED Color/
Display
Off
Link LED
Solid green
Solid amber
Off
Activity LED
Blinking green
Hardware Overview
Description
Power is being supplied to the switch.
The switch does not have power.
The switch is operating normally as a standalone switch or as
a stack master.
The switch is not the stack master.
A fault has occurred, or the switch is booting.
Description
The port is down.
The port is up and can transmit traffic at maximum speed. A
SFP+ or BaseT port can transmit at 10G.
The port is up and is transmitting traffic at lower than
maximum speed. A SFP+ or BaseT port is transmitting at 1G.
No traffic is being transmitted or received on the port.
Traffic is being transmitted or received on the port.
11

Advertisement

Table of Contents
loading

  Also See for Dell PowerEdge FN

  Related Manuals for Dell PowerEdge FN