Page 2
2017 – Jurop – Azzano Decimo (PN) Reproduction, electronic storage and dissemination, even partial, are prohibited. Jurop reserves the right to modify the products described in this manual without prior notice. Any product names mentioned herein are the trademarks of their respective owners.
– R 260 SPARE PART DATA SHEET WITH SIDE OIL TANK – R 260 SPARE PART DATA SHEET ACCESSORIES Jurop SpA . +39 0434 636811 F . +39 0434 636812 http://www.jurop.it Via Crosera n° 50 3 / 24 e-mail: info@jurop.it...
WEIGHT R 260 Direct transmission (smooth or splined shaft) 170 kg (375 Ibs) Hydraulic motor 205 kg (450 Ibs) Jurop SpA . +39 0434 636811 F . +39 0434 636812 http://www.jurop.it Via Crosera n° 50 5 / 24 e-mail: info@jurop.it...
Intended use Attention: carefully apply these prescriptions. • Air-cooled and consequentely foreseen for a non-continuous duty. R260 do not accept operating temperatures over 180 °C, checked at General recommendations not more than 150 mm from the discharge connections. • In order to the maximum efficiency of the forced air cooling system •...
See Pic. 4.1. • The weight or dimensions of the pipes must in no way stress the R • In case of R260 with hydraulic motor, provide the necessary space body. Use high temperature resistant rubber sleeves.
(and that of the actuator, either manual or pneumatic) to be removed. A) Cardan shaft drive We recommend ensuring enough space to carry out such operations. • Use telescopic cardan shafts. Jurop SpA . +39 0434 636811 F . +39 0434 636812 http://www.jurop.it Via Crosera n°...
Page 10
• Always use pulleys that are suitable to be installed on the shaft transmission for those operations requiring great angles (steering or end. Pulleys supplied by Jurop are strongly recommended. Look at the lifting). parts breakdown at the end of this manual.
Page 11
• Increase pressure and rotation speed until operating values are reached. • The machine/system manufacturer is responsible for dimensioning the lines. The machine/system manufacturer is responsible for dimensioning the lines. Jurop SpA . +39 0434 636811 F . +39 0434 636812 http://www.jurop.it Via Crosera n° 50 11 / 24 e-mail: info@jurop.it...
It is suggested to reduce the speed also when operating with pressure. • When, exhaust temperature is reduced, vane durability is increased and both oil consumption and power absorption are reduced. Jurop SpA . +39 0434 636811 F . +39 0434 636812 http://www.jurop.it Via Crosera n°...
• The new vanes have to be inserted with the rounded corner facing towards the housing (See Pic. 6.4). Replacing the vanes (R260 with rear oil tank) • Remove the vacuum pump from its bearing frame and wash it before disassembling.
Page 15
A careful cleaning of all components, including the insides of the housing and the non-return check valve and its seat, is therefore strongly recommended. Jurop SpA . +39 0434 636811 F . +39 0434 636812 http://www.jurop.it Via Crosera n°...
. 01 – R 260 23-02-2017 SPARE PART DATA SHEET SIDE OIL TANK R 260 SIDE OIL TANK Jurop SpA . +39 0434 636811 F . +39 0434 636812 http://www.jurop.it Via Crosera n° 50 19 / 24 e-mail: info@jurop.it 33082 Azzano Decimo, PN (Italia)
Page 20
R 260 with side oil tank Pos. Code Description Q.ty Pos. Code Description Q.ty 1493300200 AIR INJECTION VALVE 1/2'' 4022200313 OR 2162 1521500900 ROTOR R260 4022200341 OR 4825 1601604200 VANE 4022301001 OIL BLOCK FILTER ¼ 1605500000 HANDLE 4022301004 OIL BLOCK FILTER ¾ 16081001E0 DISTRIBUTOR 4023100140...
Page 21
SCREW M8X45 4026102910 VITE TE M10X40 ZINC 4026155705 SCREWTSPEI M8X16 ZINC. 4026350708 RONDELLA GROWER 10 ZINC Jurop SpA . +39 0434 636811 F . +39 0434 636812 http://www.jurop.it Via Crosera n° 50 21 / 24 e-mail: info@jurop.it 33082 Azzano Decimo, PN (Italia)
Page 24
33082 Azzano Decimo, PN (ITALY) Tel. +39 0434 636811 Fax. +39 0434 636812 http://www.jurop.it e-mail: info@jurop.it Jurop SpA reserves the right to modify the products described in this manual without prior notice. Jurop SpA . +39 0434 636811 F . +39 0434 636812 http://www.jurop.it Via Crosera n°...
Need help?
Do you have a question about the R260 and is the answer not in the manual?
Questions and answers