Cleaning And Maintenance; Troubleshooting - Husqvarna Automower 520 Quick Manual

To pair with the robotic lawnmower when using Husqvarna Fleet Services™ app:
1. Log in to the Husqvarna Fleet Services™ app, and follow the instructions for how to pair with a robotic lawnmower.
2. Follow step b) to d) in 1.2 Remote HMI above.
3. Select Settings > Automower® Connect > Initiate new pairing, and confirm pairing.
3. PREPAR ATIONS AND CAUTIONS
For information about Installation, see chapter 3 in the Operator's manual.
• Remove stones, branches, tools, toys or other objects on the lawn that can damage the blades.
• Warning signs shall be placed around the working area of the robotic lawnmower if it is used in public areas. The signs
shall have the following text: Warning! Automatic lawnmower! Keep away from the machine! Supervise children!
• If there is a risk of a thunderstorm, it is recommended to disconnect all connections to the charging station.

4. CLEANING AND MAINTENANCE

For information about Cleaning and Maintenance, see chapter 5 in the Operator's manual.
WARNING: Turn off the robotic lawnmower (Main switch, position 0).
CAUTION: Never use a high-pressure washer to clean the robotic lawnmower. Never use solvents for cleaning.
4.1 CLE ANING
• Clean the charging station regularly from grass, leaves, twigs and other objects that may impede docking.
• Clean around the front and rear wheels as well as the rear wheel bracket.
• If the charging strips appear to be burnt or coated, clean them using a fine grade emery cloth.
1. Set the Main switch to position 0.
2. Lift the robotic lawnmower onto its side.
3. Clean the blade disc and chassis using for example a dish brush. At the same time, check that the blade disc rotates
freely in relation to the foot guard. Also, check that the blades are intact and can pivot freely.
4.2 CHANGING THE BLADES
1. Set the Main switch to position 0, and turn the robotic lawnmower upside down.
2. Rotate the skid plate so that its holes align with the screws for the blade.
3. Remove the 3 screws. Use a straight slot or crosstip screwdriver.
4. Remove each blade and screw, and fasten new blades and screws.
5. Check that the blades can pivot freely.
5. LED INDICATOR L AMP
For information about LED indicator lamps, see chapter 3.11 and 6.4-6.5 in the Operator's manual.
The LED indicator lamp on top of the robotic lawnmower shows the current status of the robotic lawnmower.
See chapter 6.5 in the Operator's manual for suitable actions.
The LED indicator lamp on the charging station shows the current status of the charging station and loop wire.
See chapter 6.4 in the Operator's manual for suitable actions.
6. OPER ATION
For information about the operation of the robotic lawnmower, see chapter 4 Operation in the Operator's manual.

7. TROUBLESHOOTING

If the robotic lawnmower does not operate as expected, see chapter 6 Troubleshooting in the Operator's manual.
QG,P2C_2018.indd 4
EN
2018-02-28 08:25:47