Download  Print this page

Operation - Honeywell HA106 Series Important Safety Instructions Manual

The doctor's choice true hepa allergen remover air purifiers
Hide thumbs

Advertisement

OPERATION

This product earned the ENERGY STAR
by the U.S. EPA. The U.S. EPA does not endorse any manufacturer claims of healthier indoor air
from the use of this product.
Portable air purifiers are more effective in rooms where all doors and windows are closed. In general, it is
recommended that you run your air purifier while you are at home to clean the air.
HA106, 202, 300 Series Operation:
• Once the filters have been unwrapped and replaced in the unit, plug the power cord into a working
electrical outlet.
• Select the desired cleaning level by simply TAPPING the power symbol
( ) to toggle through the setting options. A blue LED light will illuminate the selected setting:
Germ, General Clean or Allergen.
TAP POWER ( ) for on/off & cleaning level selection.
ALLERGEN optimizes allergen capturing
performance during allergen season.
GENERAL CLEAN for general, everyday
air cleaning.
GERM optimizes germ capturing performance.
Use during cold & flu season.
TAP TURBO ( ) for power cleaning or fast
odor reduction.
• The Turbo setting operates the unit at the highest
speed. This setting will maximize the unit's ability to help reduce odors and will help clean the air
quickly. To select the Turbo setting the unit must already be running at one of the 3 cleaning settings,
TAP the Turbo icon ( ). The Turbo LED will illuminate. TAPPING the Turbo icon ( ) again will return the
air purifier to the previous cleaning setting.
To shut OFF, tap the Power symbol ( ) until the air purifier shuts off.
Using the Timer Option:
The Timer Option ( ) allows you to select how long the air purifier will run before it automatically shuts
off. There are three pre-set run times: 2, 4, and 8 hours. Do not use this option if you want the unit to run
continuously.
• To set the unit for Automatic Shut Off, TAP the Auto-off Timer icon ( ).
• Continue to TAP to toggle through to the desired time setting.
• An LED light will illuminate to indicate the selected run time (Fig. 5).
• The unit will automatically shut off after the indicated run time.
4
rating by meeting strict energy efficiency guidelines set
®
Fig. 3 HA106 and HA202 series Control Panel
Fig. 4 HA300 series Control Panel
Fig. 5 Timer Function
Using the Dimmer Option
The Dimmer Option ( ) allows you to adjust the brightness of the LED displays on
the control panel (Fig. 6). You may wish to adjust the brightness depending on the
room where the unit is placed. The unit always turns on with the brightness on HIGH.
To adjust brightness:
• TAP the Dimmer icon ( ) once to dim the lights to LOW.
• TAP the Dimmer icon ( ) twice and it will shut the lights OFF. (the air purifier
will not shut off).
• TAPPING the Dimmer icon ( ) a third time will return the brightness to HIGH.
ELECTRONIC FILTER CHANGE REMINDER
These air purifier models each have two electronic filter checks to remind you
when to check and replace the HEPA filters and the Odor Reducing Pre-filter
based on the air cleaner's hours of use.
When the HEPA filter(s) and/or the Pre-filter need to be replaced, the "Check
Filter" or "Check Pre-Filter" light will illuminate (Fig. 7).
You should periodically check these filters. Depending on operating conditions,
the HEPA filters should be replaced every 12 months, and the Odor Reducing
Pre-filters every 3 months, especially if there have been heavy odors and
particles in the home.
To RESET Either Electronic Filter Check:
After you have replaced the appropriate filter(s) the "Check Filter or "Check Pre-Filter" light will remain
on until it is reset. With the unit powered on, press the lighted button and hold for approximately 2
seconds until the light turns off. The electronic filter check is now reset. Depending on individual usage
(environment and hours used), you may need to replace filters more or less frequently.
NOTE: If you change the Pre-filter or HEPA filter before the Electronic Filter Check lights are illuminated,
it is possible to re-set the light indicators. With the unit plugged in, but NOT powered on, press and hold
each button individually for at least 5 seconds. This will illuminate the indicator light. After the light turns
on, individually press and hold the "Check Filter" or "Check Pre-Filter" button until each light goes off.
At this point, the filter indicator will be re-set to it's original "clean" status.
These cleaning intervals are intended as guidelines only. Performance of any filter media is dependent
upon the concentration of contaminates going through the system. High concentrations of contaminates
such as dust, pet dander and smoking will reduce the useful performance of the filter.
NOTE: None of the filters are washable. Do not immerse them in water.
REPLACING THE HEPA FILTERS
MAINTAINING YOUR STAGE 1 WASHABLE PARTICLE PRE-FILTER
See INSTALLATION INSTRUCTIONS on page 3 of this manual.
Your air purifier was shipped with a replaceable HEPA filter
the Home Depot store where you purchased your air purifier, or can be ordered directly from Home Depot
A
at www.HomeDepot.com.
Please note that each model series takes a different number of HEPA filters: HA106 series takes 1 HEPA
Replacement Filter, HA202 series takes 2 HEPA
R
If you need assistance or have any questions, contact Kaz Consumer Services 1-800-477-0457.
Fig. 6 Dimmer Function
Fig. 7 Will illuminate
change the HEPA filter(s)
and/or the pre-filter
A
A
. Replacement filters can be purchased at
R
R
A
Replacement Filters , HA300 series takes 3 HEPA
R
when it is time to
A
A
A
A
R
R
R
Filters
R
5

Hide quick links:

Advertisement

loading

  Related Manuals for Honeywell HA106 Series

This manual is also suitable for:

Ha202 seriesHa300 series