Samsung Series 5 User Manual page 14

Analogue
4.
Press the ENTER
If you want to stop Auto Store, press the ENTER
➣
The "Stop Auto Store?" message will be displayed.
Select "Yes" by pressing the ◄or ►button, then press the ENTER
button.
Digital & Analogue / Digital
4.
The update procedures differ depending on the selected "Country".
Update the channel list by selecting an appropriate option.
When the "Country" was set to "Finland"

Press the ▲ or ▼ button to select "Auto", "Cable" or "Aerial". Press the
ENTER button.
Press the ENTER
- Cable: Scans cable channels.
- Aerial: Scans aerial channels.
This product cannot scan both cable and aerial channels at the same
➣
time.
When it has finished, the number of scanned services will be displayed.
➣
The existing favourite channel list will not be deleted when the channel list
➣
is updated.
When the "Country" was set to "Sweden", or "Denmark"

Press the ▲ or ▼ button to select "Cable" or "Aerial". Press the ENTER
button.
When selecting "Cable":
- Frequency: Displays the frequency for the channel. (Differs in each
country)
- Modulation: Displays available modulation values.
- Symbol Rate: Displays available symbol rates.
- Network ID: Displays the network identification code.
Press the red button to start the scan for digital services. When it has
finished, channels are updated in the channel list.
When selecting "Aerial":
Press the ENTER
When the "Country" was set to "Norway"

Press the ENTER
button to select "Start".
button to select "Start".
button to select "Start".
button to select "Start".
button.
English - 
Auto Store
Auto Store in progress.
Analogue Channels: 0
Stop
Enter
Auto Store
Select the Antenna source to memorize.
Cable
Aerial
Move Enter
Auto Store
Network ID Frequency
999 143000kHz
Modulation Symbol Rate
QAM 64 6875 kS/s
Move Adjust Enter
Auto Store
Auto Store in progress.
Digital Channels: 29
Analogue Channels: 0
Stop
Enter
S3
172MHz
20%
Return
Start
Start
Return
Skip
154MHz
20%
Return