Remote Control Buttons You can use the remote control up to a distance of about 23 feet from the TV. POWER Turns the TV on and off. NUMERIC BUTTONS Press to change the channel. Press to select additional channels (digital and analog) being broadcast by the same station.
HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2(DVI) jack and the audio cables to the DVI AUDIO IN [R-AUDIO-L] jacks on the back of the TV.
Each DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration. ➢ When connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable.
When connecting a VCR, match the color of the connection terminal to the cable. ➢ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). TV Rear Panel...
➢ Each Digital Audio System has a different back panel configuration. ➢ When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
HDMI/DVI Cable (Not supplied) ➢ Each PC has a different back panel configuration. ➢ When connecting a PC, match the color of the connection terminal to the cable. ➢ When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) terminal.
: 50 Color : 50 Tint (G/R) : G50/R50 Press the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon’s sub-menu. Press the EXIT button to exit. ➢...
When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the ◄ or ► to select the correct analog signal cable system source among STD, HRC, and IRC, then press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital.
This Plasma panel uses a panel consisting of sub pixels (6,220,800) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Page 13
105 Challenger Road Ridgefield Park, NJ 07660-0511 Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Centre d’appel – heures de service (du lundi au dimanche, de 9 h à 12 h (HNE)) www.samsung.com/global/register. Prises du panneau arrière et latéral...
Page 14
Remote Control Buttons You can use the remote control up to a distance of about 23 feet from the TV. POWER Permet d’allumer et d’éteindre le téléviseur. Pour sélectionner directement le mode TV. NUMERIC BUTTONS Pour changer le canal. Pour sélectionner des canaux supplémentaires (numériques...
Page 15
• La différence entre les interfaces HDMI et DVI réside dans le fait que la HDMI est de plus petites dimensions, qu’elle est dotée du composant de codage HDCP (protection contre la copie numérique à large bande passante).
Le composant vidéo sépare le vidéo en Y (luminance (luminosité)), PB (bleu) et PR (rouge) pour une qualité d'image supérieure. S'assurer que les branchements audio et vidéo correspondent. Par exemple, si un câble vidéo Composante est branché à la prise d’...
➢ Si le magnétoscope est un modèle “mono” (non stéréo), relier les prises d’entrée audio droite et gauche du téléviseur au moyen d’ un connecteur en Y (non fourni). Il est également possible de brancher le câble à la prise “R”.
Câble optique (non fourni) ➢ La diffusion audio en 5.1 canaux est possible lorsque le téléviseur est raccordé à un appareil externe doté de cette fonction audio. ➢ La configuration du panneau arrière de chaque système audionumérique est différente.
➢ La configuration du panneau arrière de chaque ordinateur est différente. ➢ Lors du branchement d’un ordinateur, les couleurs du câble et de la borne de branchement doivent correspondre. ➢ Il faut brancher un câble HDMI/DVI dans la prise HDMI IN 2(DVI).
'allumer Visualisation de l’affichage Appuyez sur la touche INFO de la télécommande. Le téléviseur affiche alors le canal, le type de son et l’état de certains paramètres de son et d’image. TV #1 Ven, déc. 19 2:05 am 1080i 16:9 Français...
Cable : 10 Intro. Changement du format normal de l'image Il est possible de choisir le type d’image qui correspond le plus à ses exigences. Appuyer sur la touche MENU pour afficher le menu. Appuyer sur la touche ENTER pour choisir Image.
● Zoom1: Étirer l’écran à la verticale pour l’amener au rapport 16:9. ● Zoom2: Étirer l’image Zoom1 à la verticale. ● Format large: Étirer l’image à l’horizontale et à la verticale pour un affichage optimal. ● 4:3: Régler l’image au format 4:3.
Dépannage Le tableau ci-dessous dresse la liste des problèmes courants et suggère des solutions. Si aucun de ces conseils ne permet de corriger le problème, communiquer avec le centre de service Samsung le plus près. Problème Image de mauvaise qualité.
Page 24
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center CANADA 1-800-SAMSUNG (7267864) U.S.A 1-800-SAMSUNG (7267864) Web Site Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada www.samsung.com/ca...