Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Fortek Security Systems Manuals
  4. IP Access Controllers
  5. ST1
  6. Operational manual

Fortek Security Systems ST1 Operational Manual

Keyless access system solutions
Hide thumbs

Advertisement

Quick Links

Download this manual
ST1 Operational Manual
Keyless Access System Solutions
V2.30
Feb, 2018

Advertisement

loading
Need help?

Need help?

Do you have a question about the ST1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fortek Security Systems ST1

  • Page 1 ST1 Operational Manual Keyless Access System Solutions V2.30 Feb, 2018...
  • Page 2 Fortek Security Systems ST1 Operative Manual System Setup When the system is powered for the first time the green and orange light will be blinking simultaneously indicating that initial setup is required. Make sure to have the access credentials (keyfobs, access cards, cellphone tags) you want to enroll.
  • Page 3 Fortek Security Systems System functions - Operational Mode 1 1. Enroll a single credential: To incorporate a new credential to the system. 2. Enroll multiples credentials: To incorporate a number of credentials to the system. 3. Delete a credential: To delete a credential in order to prevent unwanted access.
  • Page 4 Fortek Security Systems Keypad Instructions - Operational Mode 1 1 - Enroll a single credential Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain on to indicate you have entered into the programming mode.
  • Page 5 Fortek Security Systems 3 - Delete a credential Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain on to indicate you have entered into the programming mode. Enter the 4 digit security password – factory default:1234. The green light will blink twice if the correct password was entered.
  • Page 6 Fortek Security Systems 6 – Change controller reset key The controller comes with a default 7 digits reset key ‘4812446’ used to reset the system to manufacturer settings, and also used to reset the 4 digits security password to the default ‘1234’...
  • Page 7 Fortek Security Systems 9 - Unlocking time set Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain on to indicate you have entered into the programming mode. Enter the 4 digit security password.. The green light will blink twice if the correct password was entered.
  • Page 8 Fortek Security Systems 12 – System Reset Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain on to indicate you have entered into the programming mode. Press Enter "ENT" key, the green light will blink once.
  • Page 9 Fortek Security Systems System functions - Operational Mode 2 1. Enroll a single credential: To incorporate a new credential to the system. 2. Enroll multiple credentials: To incorporate a number of credentials to the system. 3. Delete a credential: To delete a credential in order to prevent unwanted access.
  • Page 10 Fortek Security Systems Keypad Operation Instructions – Operational Mode 2 1 - Enroll a single credential Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain on to indicate you have entered into the programming mode.
  • Page 11 Fortek Security Systems 3 - Delete a credential Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain onto indicate you have entered into the programming mode. Enter the 4 digit security password – factory default:1234. The green light will blink twice if the correct password was entered.
  • Page 12 Fortek Security Systems 6 – Change controller reset key The controller comes with a default 7 digits reset key ‘4812446’ used to reset the system to manufacturer settings, and also used to reset the 4 digits security password to the default ‘1234’...
  • Page 13 Fortek Security Systems 8 - Locked Mode Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain on to indicate you have entered into the programming mode. Enter the 4 digit security password – factory default:1234. The green light will blink twice if the correct password was entered.
  • Page 14 Fortek Security Systems 11- Reset Password Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain on to indicate you have entered into the programming mode. Press Enter "ENT" key, the green light will blink once.
  • Page 15 Fortek Security Systems Security features and error signals: Upon entering a wrong command key the system will beep once, the orange light will blink  once and remain off indicating that the system exited the programming mode Upon thirty five seconds(35)of idle time between commands the system will beep once, the ...
  • Page 16 Fortek Security Systems System Functions – Operational Mode 3 1. Enroll/Edit a single credential: To incorporate a new credential into the system or modify authorized door to an existent credential 2. Enroll/Edit multiple credentials: To incorporate a number of credentials into the system or modify authorized doors to existent credentials 3.
  • Page 17 Fortek Security Systems Keypad Operation Instructions – Operational Mode 3 1 – Enroll/Edit a single credential Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain on to indicate you have entered into the programming mode.
  • Page 18 Fortek Security Systems To finish the operation press and hold the Escape key "ESC" until double beep is heard, the orange and green light will be turn off indicating that the system exited the programming mode. Note 1: The last 4 digits printed on the credential are automatically stored into the system, allowing future deletion or replacement if necessary.
  • Page 19 Fortek Security Systems Present the new credential over the reader, successful the light on the reader will blink twice, turning from red to green, indicating the credential was successfully incorporated into the system. 5 - Door monitor activation/deactivation (door contact installation required) Press and hold the Escape key "ESC"...
  • Page 20 Fortek Security Systems 8 - Locked Mode Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain on to indicate you have entered into the programming mode. Enter the 4 digit security password – factory default:1234. The green light will blink twice if the correct password was entered.
  • Page 21 Fortek Security Systems 11- Password Reset Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain on to indicate you have entered into the programming mode. Press Enter "ENT" key, the green light will blink once.
  • Page 22 Fortek Security Systems Security features and error signals: Upon entering a wrong command key the system will beep once, the orange light will blink  once and remain off indicating that the system exited the programming mode Upon thirty five seconds(35)of idle time between commands the system will beep once, the ...