01-BN68-00574C-00Eng.qxd 2/11/04 8:24 AM Page 5 Viewing the Connection Panel Option Power Input Whenever you connect an audio or video system to your set, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.
Page 2
01-BN68-00574C-00Eng.qxd 2/11/04 8:24 AM Viewing the Connection Panel Connecting an Aerial or Cable Television Network (depending on the model) To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial - A cable television network - A satellite network Connecting a Set-Top Box, VCR, or DVD...
Page 3
01-BN68-00574C-00Eng.qxd 2/11/04 8:24 AM Viewing the Connection Panel Connecting a DVD Player or Set-Top Box to the TV with a DVI-D Cable - Connect a DVI-D cable between the DVI-I INPUT connector on the TV and the DVI connector on the DVD player/Set-Top BOX. - Connect a set of audio cables between the PC AUDIO INPUT jack on the TV and the AUDIO OUTPUT jacks on the DVD player/ Set-Top BOX.
04-BN68-00574C-00Eng.qxd 2/17/04 2:43 AM How to connect the cables and stand base Remove the cover as shown in the picture. Replace the cover. Page 61 Connect the cables as shown in the picture. Attach the stand to the TV set as shown in the picture. Note : The curved side of the stand base should be placed at the back of the TV set as shown in the above figure.