Turning The Tv On And Off; Viewing The Menus; Storing Channels In Memory (Automatic Method) - Samsung LN40B50 Quick Setup Manual

Turning the TV On and Off

Press the POWER button on the remote control.
You can also use the POWER

Viewing the Menus

With the power on, press the MENU button.
1
The main menu appears on the screen.
The menu's left side has the following icons: Picture,
Sound, Channel , Setup, Input, Application, Support.
Press the ▲ or ▼ button to select one of the icons.

Then press the ENTERE button to access the
icon's sub-menu. Press the EXIT button to exit.
The on-screen menus disappear from the
➣
screen after about one minute.
Storing Channels in Memory
(Automatic Method)
Press the MENU button to display the menu.
1
Press the ▲ or ▼ button to select "Channel", then
press the ENTERE button.
Press the ▲ or ▼ button to select "Auto Program",

then press the ENTERE button.
Press the ▲ or ▼ button to select the antenna

connection, then press the ENTERE button.
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
button on the TV.
Start
Start
Start
U Move E Enter m Skip
When selecting the Cable TV system: Press the
4
ENTERE button to start the auto program.
Press the ▲,▼, ◄ or ► to select the correct analog
signal cable system source among "STD", "HRC",
and "IRC". Press the ▲ or ▼ button to select "Start",
then press the ENTERE button. If you have Digital
cable TV, select the cable system signal source for
both Analog and Digital.
Selects the cable system.
Analog
Digital
The TV begins memorizing all available stations.
5
Press the EXIT button to exit.
Auto Program in Progress.
DTV Cable : 12 Cable : 32
Removing scrambled channel.
DTV Cable : 16 Cable : 45
➣
To Stop the Auto Program Function
Press the MENU button while the Auto Program function is
being executed. You can also press the ENTERE button
to stop the setup.
Checking to see if Channels were Stored in Memory
Press the CH button. Only the channels stored in memory
will be selected (in order).
Selecting the antennas
• Air: "Air" antenna signal.
• Cable: "Cable" antenna signal.
• Auto: "Air" and "Cable" antenna signals.
English-
Auto Program
HRC
STD
STD HRC
Start
U Move E Enter
Auto Program
Stop
E Enter
Auto Program
DTV Cable 41
Stop
E Enter
After all the available channels are stored, it
starts to remove scrambled channels. The Auto
program menu then reappears.
IRC
IRC
m Skip
Cable 38
50%
m Skip
77%
m Skip