Download Print this page
TP-Link WA850RE Installation Manual
TP-Link WA850RE Installation Manual

TP-Link WA850RE Installation Manual

Universal wi-fi range extender

Advertisement

Quick Links

Quick Installation Guide
2
Connect and Extend
Method 1: Via the WPS Button
1. Press the WPS button on your router.
WPS
2. Within 2 minutes, press the
extender for 1 second.
The extended network shares the same network
name and password as your router.
Note: If the WPS method fails, or if you want to customize the
extended network name, use Method 2 or 3.
3
Relocate and Enjoy
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your host network.
2. Wait until the
LEDs are lit. Make sure 3 or more LEDs lit. If not, relocate the
extender closer to the router to achieve better signal quality.
Enjoy the internet!
Method 2: Via a Web Browser
1. Connect your computer or smartphone to the
extender's network.
The WPS button might
TP-Link_Extender
look like one of these:
2. Launch a web browser, and enter
http://tplinkrepeater.net or http://192.168.0.254
in the address bar. Create a password to log in.
button on the
Note: If the login window does not appear, refer to FAQ > Q1.
The RE LED should
change from blinking to
solid on, indicating
successful connection.
3. Follow the instructions to complete the setup.
Note:
1. The RE LED should turn solid on. If not, refer to FAQ > Q3.
2. You can customize the network name during the setup.
1
Power On
Plug the extender into a power outlet next to your router.
http://tplinkrepeater.net
Create Password
Confirm Password
Start
Host Network
Wait until the Wireless
LED turns solid on.
Method 3: Via the Tether App
1. Download the Tether app.
or
Scan for Tether
2. Connect your smartphone to the extender's
network.
TP-Link_Extender
3. Launch the Tether app, and select your extender.
Create a password to log in.
4. Follow the instructions to complete the setup.
Note:
1. The RE LED should turn solid on. If not, refer to FAQ > Q3.
2. You can customize the network name during the setup.
Network Name:
Customized/same as host network
Password:
Same as host network
Extended Network
Best
5
4
≥ 3 LEDs lit on
3
Good
2
1
Slow/Unstable
Tether

Advertisement

loading

Summary of Contents for TP-Link WA850RE

  • Page 1 Power On Plug the extender into a power outlet next to your router. Quick Installation Guide Wait until the Wireless LED turns solid on. Connect and Extend Method 1: Via the WPS Button Method 2: Via a Web Browser Method 3: Via the Tether App 1.
  • Page 2 With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.