Connecting A Vcr; Video Connection - Samsung LN32A650A1F Quick Setup Manual

Connecting a VCR

Video Connection

TV Side Panel
Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
Each VCR has a different back panel configuration.
➣
When connecting a VCR, match the color of the connection terminal to the cable.
➣
When connecting to AV NI 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable
➣
(Yellow).
S-Video Connection
TV Side Panel
TV Rear Panel

Audio Cable

(Not supplied)
Video Cable

(Not supplied)
TV Rear Panel
1


VCR Rear Panel
RF Cable
(Not supplied)
VCR Rear Panel
RF Cable
(Not supplied)
S-Video Cable
(Not supplied)
Audio Cable
(Not supplied)
English-
Unplug the cable or antenna
1
from the back of the TV.
Connect the cable or antenna

to the ANT IN terminal on the
back of the VCR.
Connect an RF Cable between

the ANT OUT terminal on the
VCR and the ANT IN terminal
on the TV.
Connect a Video Cable

between the VIDEO OUT jack
on the VCR and the AV IN 1
[Y/VIDEO] or AV IN 2 [VIDEO]
jack on the TV.
Connect Audio Cables between

the AUDIO OUT jacks on the
VCR and the AV IN 1 (or AV IN 2)
[R-AUDIO-L] jacks on the TV.
If you have a "mono" (non-stereo) VCR,
➣
use a Y-connector (not supplied) to
connect to the right and left audio input
jacks of the TV. Alternatively, connect
the cable to the "R" jack. If your VCR is
stereo, you must connect two cables.
To begin, follow steps 1–3 in
1
the previous section to connect
the antenna or cable to your
VCR and your TV.
Connect an S-Video Cable

between the S-VIDEO OUT jack
on the VCR and the AV IN 2
[S-VIDEO] jack on the TV.
Connect Audio Cables between

the AUDIO OUT jacks on the VCR
and the AV IN 2 [R-AUDIO-L]
jacks on the TV.
An S-Video cable may be included
with a VCR. (If not, check your local
electronics store.)
Each VCR has a different back
➣
panel configuration.
When connecting a VCR, match
➣
the color of the connection
terminal to the cable.