Turning The Tv On And Off; Viewing The Menus; Storing Channels In Memory (Automatic Method) - Samsung LN32A550P3F Quick Setup Manual

Turning the TV On and Off

Press the POWER button on the remote control.
You can also use the POWER

Viewing the Menus

With the power on, press the MENU button.

The main menu appears on the screen.
The menu's left side has icons: Picture, Sound,
Channel, Setup, Input, Application.
Press the ▲ or ▼ button to select one of the icons.
2
Then press the ENTER
icon's sub-menu. Press the EXIT button to exit.
The on-screen menus disappear from the
➣
screen after about one minute.
Storing Channels in Memory
(Automatic Method)
Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then
press the ENTER
Press the ▲ or ▼ button to select "Auto Program",
2
then press the ENTER
Press the ▲ or ▼ button to select the antenna
3
connection, then press the ENTER
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
Move
When selecting the Cable TV system: Press the
4
ENTER button to start the auto program.
Press the ▲,▼, ◄ or ► to select the correct analog
signal cable system source among "STD", "HRC",
and "IRC". Press the ▲ or ▼ button to select "Start",
then press the ENTER
cable TV, select the cable system signal source for
both Analog and Digital.
Auto Program
Selects the cable system.
Analog
STD
Digital
STD
Move
button on the TV.
button to access the
button.
button.
button.
Start
Start
Start
Enter Return
button. If you have Digital
HRC IRC
HRC IRC
Start
Enter Return
The TV begins memorizing all available stations.
5
Press the EXIT button to exit.
Auto Program in Progress.
DTV Cable : 12 Cable : 32
Removing scrambled channel.
DTV Cable : 16 Cable : 45
➣
To Stop the Auto Program Function
Press the MENU button while the Auto Program function is
being executed. You can also press the ENTER
to stop the setup.
Checking to see if Channels were Stored in Memory
Press the CH button. Only the channels stored in memory
will be selected (in order).
Selecting the antennas
• Air: "Air" antenna signal.
• Cable: "Cable" antenna signal.
• Auto: "Air" and "Cable" antenna signals.
English-
Auto Program
Stop
Enter
Auto Program
DTV Cable 41
Stop
Enter
After all the available channels are stored, it
starts to remove scrambled channels.
The Auto program menu then reappears.
Cable 38
50%
Return
77%
Return
button