Table of Contents
Advertisement
Turning the TV On and Off
Press the POWER
button on the remote control.
You can also use the POWER
Viewing the Menus
With the power on, press the MENU button.
The main menu appears on the screen.
The menu's left side has icons: Picture, Sound,
Channel, Setup, Input, Application.
Press the ▲ or ▼ button to select one of the icons.
2
Then press the ENTER
icon's sub-menu. Press the EXIT button to exit.
To move to a lower menu, turn the wheel
➣
clockwise when the menu Display is displayed.
To move to a higher menu, turn the wheel
counterclockwise.
The on-screen menus disappear from the
➣
screen after about one minute.
Storing Channels in Memory
(Automatic Method)
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then
press the ENTER
Press the ▲ or ▼ button to select "Auto Program",
2
then press the ENTER
Press the ▲ or ▼ button to select the antenna
3
connection, then press the ENTER
Auto Program
Select the Antenna source to memorize.
Air
Cable
Air+Cable
Move
button on the TV.
button to access the
button.
button.
button.
Start
Start
Start
Enter
Return
When selecting the Cable TV system: Press the
4
ENTER
Press the ▲,▼, ◄ or ► to select the correct analog
signal cable system source among "STD", "HRC",
and "IRC". Press the ▲ or ▼ button to select "Start",
then press the ENTER
cable TV, select the cable system signal source for
both Analog and Digital.
Selects the cable system.
Analog
Digital
The TV begins memorizing all available stations.
Press the EXIT button to exit.
Auto Program in Progress.
DTV Cable : 12 Cable : 32
Removing scrambled channel.
DTV Cable : 16 Cable : 45
➣
To Stop the Auto Program Function
Press the MENU button while the Auto Program function is
being executed. You can also press the ENTER
to stop the setup.
Checking to see if Channels were Stored in Memory
Press the CH button. Only the channels stored in memory
will be selected (in order).
Selecting the antennas
• Air: "Air" antenna signal.
• Cable: "Cable" antenna signal.
• Air+Cable: "Air" and "Cable" antenna signals.
English-
button to start the auto program.
button. If you have Digital
Auto Program
STD
HRC
STD
HRC
Start
Move
Enter
Auto Program
Stop
Enter
Auto Program
DTV Cable 41
Stop
Enter
After all the available channels are stored, it
starts to remove scrambled channels. The Auto
program menu then reappears.
IRC
IRC
Return
Cable 38
50%
Return
77%
Return
button
Advertisement
Table of Contents
